Laser Preheating for Hot Crack Reduction in Direct Metal Deposition of Inconel 738LC
Open Access
Abstract
Welding of precipitation-hardenable nickel-based super alloys that contain large amounts of Al and Ti is challenging due to their high susceptibility to hot cracking. For metal additive manufacturing (AM) by powder bed fusion (PBF) or direct metal deposition (DMD), various welding process adjustments may prevent the formation of cracks. The aim of this study is the development and experimental characterization of a laser preheating process for DMD of Inconel 738LC. Metallographic cross-sections of multiple test specimens were analyzed to quantify the effect of initial substrate temperature, specimen geometry, deposition parameters, and scanning strategy on the resulting crack density. The results show that increased substrate temperature by laser preheating and reduced specimen size leads to crack-free deposited structures. Therefore, the proposed preheating process may be applied for part fabrication or repair by DMD to reduce or even completely prevent the risk of hot cracking.Keywords
Funding Information
- Innosuisse - Schweizerische Agentur für Innovationsförderung (25498)
This publication has 36 references indexed in Scilit:
- Processability of different IN738LC powder batches by selective laser meltingJournal of Materials Processing Technology, 2016
- Particularly Selective Sintering of Metal Powders by Pulsed Laser RadiationKey Engineering Materials, 2016
- Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profilesMaterials & Design, 2016
- Laser Engineered Net Shape (LENS) Technology for the Repair of Ni-Base Superalloy Turbine ComponentsMetallurgical and Materials Transactions A, 2014
- Laser surface melting of a complex high alloy steelMaterials & Design (1980-2015), 2014
- High temperature material properties of IN738LC processed by selective laser melting (SLM) technologyRapid Prototyping Journal, 2013
- The liquation cracking behavior of IN738LC superalloy during low power Nd:YAG pulsed laser weldingMaterials Characterization, 2012
- Induction-assisted laser welding of IN-738 nickel–base superalloyMaterials Chemistry and Physics, 2009
- Boundary liquation and interface cracking characterization in laser deposition of Inconel 738 on directionally solidified Ni-based superalloyScripta Materialia, 2005
- Contribution of constitutional liquation of gamma prime precipitate to weld HAZ cracking of cast Inconel 738 superalloyScripta Materialia, 2004