Load Limits with Fuel Effects of a Premixed Diesel Combustion Mode
Authors:
- 15 June 2009
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Premixed diesel combustion is intended to supplant conventional combustion in the light to mid load range. This paper demonstrates the operating load limits, limiting criteria, and load-based emissions behavior of a direct-injection, diesel-fueled, premixed combustion mode across a range of test fuels. Testing was conducted on a modern single-cylinder engine fueled with a range of ultra-low sulfur fuels with cetane number ranging from 42 to 53. Operating limits were defined on the basis of emissions, noise, and combustion stability. The emissions behavior and operating limits of the tested premixed combustion mode are independent of fuel cetane number. Combustion stability, along with CO and HC emissions levels, dictate the light load limit. The high load limit is solely dictated by equivalence ratio: high PM, CO, and HC emissions result as overall equivalence ratio approaches stoichiometric.Keywords
This publication has 21 references indexed in Scilit:
- A Study of the Transition Between Lean Conventional Diesel Combustion and Lean, Premixed, Low-Temperature Diesel CombustionJournal of Engineering for Gas Turbines and Power, 2008
- Method and Detailed Analysis of Individual Hydrocarbon Species From Diesel Combustion Modes and Diesel Oxidation CatalystJournal of Engineering for Gas Turbines and Power, 2008
- Deactivation of a diesel oxidation catalyst due to exhaust species from rich premixed compression ignition combustion in a light-duty diesel engineInternational Journal of Engine Research, 2007
- Comparison of Diesel Oxidation Catalyst Performance on an Engine and a Gas Flow ReactorSAE International Journal of Advances and Current Practices in Mobility, 2007
- The Development of Throttled and Unthrottled PCI Combustion in a Light-Duty Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 2006
- Evaluation of a Narrow Spray Cone Angle, Advanced Injection Timing Strategy to Achieve Partially Premixed Compression Ignition Combustion in a Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 2005
- Experimental Investigation of PCCI-DI Combustion on Emissions in a Light-Duty Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 2004
- A Review of Experimental and Simulation Studies on Controlled Auto-Ignition CombustionSAE International Journal of Advances and Current Practices in Mobility, 2001
- Approaches to Solve Problems of the Premixed Lean Diesel CombustionSAE International Journal of Advances and Current Practices in Mobility, 1999
- Emission Characteristics of Premixed Lean Diesel Combustion with Extremely Early Staged Fuel InjectionSAE International Journal of Advances and Current Practices in Mobility, 1996