ESD-immunity evaluations of a 40 V nLDMOS with embedded SCRs in the drain side
- 1 May 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Abstract
The impacts of current-path variation on the ESD robustness of nLDMOS devices as the drain-side modulation by a 0.18 μm/40 V process are evaluated in this paper. From the transmission-line-pulsing (TLP) measurement, the secondary breakdown current (I t2 ) of an nLDMOS with the drain-side embedded SCR structure & "pnp" arrangement (DUT-2) increased from 2.498 A up to > 7 A (at least upgraded 180%) as compared with the reference nLDMOS device. And, the trigger voltage (V t1 ) is also decreased; particularly the reduction of the pure SCR (DUT-3) is the most one. Meanwhile, the Ron of the pure LDMOS (DUT-4) increased, and the I t2 value can also upgrade from 2.498 A to 3.043 A (improved about 21.8%). In this paper, we can find that the I t2 value of the Reference nLDMOS is lower than that of the pure SCR and pure nLDMOS translated from the nLDMOS-SCR (pnp-arranged); therefore the I t2 value of this nLDMOS-SCR (pnp) composed device will be higher than the Reference nLDMOS.Keywords
This publication has 7 references indexed in Scilit:
- The Trench Power MOSFET—Part II: Application Specific VDMOS, LDMOS, Packaging, and ReliabilityIEEE Transactions on Electron Devices, 2017
- ESD Protection Design for Touch Panel Control IC Against Latchup-Like Failure Induced by System-Level ESD TestIEEE Transactions on Electron Devices, 2017
- A New Low-Voltage Triggering SCR for the Protection of a Double RESURF HV-LDMOSIEEE Electron Device Letters, 2016
- RF LDMOS with excellent robustness for wideband application2015
- Design and optimization of ESD lateral NPN device in 14nm FinFET SOI CMOS technology2015
- RC-Embedded LDMOS-SCR With High Holding Current for High-Voltage I/O ESD ProtectionIEEE Transactions on Device and Materials Reliability, 2015
- Study of LDMOS-SCR: A high voltage ESD protection device2010