Effect of Cellulose Nanowhiskers on Surface Morphology, Mechanical Properties, and Cell Adhesion of Melt-Drawn Polylactic Acid Fibers
- 28 March 2014
- journal article
- research article
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 15 (4) , 1498-1506
Abstract
Polylactic acid (PLA) fibers were produced with an average diameter of 11.2 (±0.9) μm via a melt-drawing process. The surface of the PLA fibers was coated with blends of cellulose nanowhiskers (CNWs) (65 to 95 wt %) and polyvinyl acetate (PVAc). The CNWs bound to the smooth PLA fiber surface imparted roughness, with the degree of roughness depending on the coating blend used. The fiber tensile modulus increased 45% to 7 GPa after coating with 75 wt % CNWs compared with the uncoated PLA fibers, and a significant increase in the fiber moisture absorption properties at different humidity levels was also determined. Cytocompatibility studies using NIH-3T3 mouse fibroblast cells cultured onto CNWs-coated PLA surface revealed improved cell adhesion compared with the PLA control, making this CNW surface treatment applicable for biomedical and tissue engineering applications. Initial studies also showed complete cell coverage within 2 days.Keywords
This publication has 70 references indexed in Scilit:
- Bioresorbable composite screws manufactured via forging process: Pull-out, shear, flexural and degradation characteristicsJournal of the Mechanical Behavior of Biomedical Materials, 2013
- Novel scaffold design with multi-grooved PLA fibersBiomedical Materials, 2011
- Poly(lactic acid) fiber: An overviewProgress in Polymer Science, 2007
- Supramolecular morphology of two‐step, melt‐spun poly(lactic acid) fibersJournal of Applied Polymer Science, 2002
- Effects of molecular architecture on two‐step, melt‐spun poly(lactic acid) fibersJournal of Applied Polymer Science, 2002
- A Literature Review of Poly(Lactic Acid)Journal of Polymers and the Environment, 2001
- Thermal and Rheological Properties of Commercial-Grade Poly(Lactic Acid)sJournal of Polymers and the Environment, 2000
- Biodegradable fibers of poly(L-lactide) produced by high-speed melt spinning and spin drawingJournal of Applied Polymer Science, 1999
- Preparation and characterization of poly(l-lactic acid) foamsPolymer, 1994
- General crystallization behaviour of poly(l-lactic acid)Polymer, 1980