Totally Enclosed Self-Circulation Axial Ventilation System Design and Thermal Analysis of a 1.65-MW Direct-Drive PMSM
- 5 April 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 65 (12) , 9388-9398
Abstract
This paper presents a totally enclosed self-circulation (TESC) axial ventilation system (AVS) for large direct-drive permanent magnet synchronous machines (PMSMs). The configuration and the cooling air circulation process of the cooling system are described in detail. Then, the lumped parameter (LP) based airflow analysis and thermal analysis applicable to large PMSMs with the presented TESC AVS are proposed. The airflow network model and thermal network model are set up, respectively, and both of them are programmed. In order to verify the feasibility of the ventilation system and the accuracy of the LP models, a 1.65-MW PMSM prototype with the proposed ventilation system is developed and manufactured, and the temperature rise of the prototype is tested under generator operation mode. The accuracies of the developed airflow network model and thermal network model are verified by comparing the calculation results of the temperature rise with the test results. The LP models can be used to investigate the effects of different geometrical and operational conditions on the distributions of the airflow rate and the temperature of PMSMs with the TESC AVS.Keywords
This publication has 24 references indexed in Scilit:
- Predicting the Temperature and Flow Distribution in a Direct Oil-Cooled Electrical Machine With Segmented StatorIEEE Transactions on Industrial Electronics, 2015
- A Quantitative Comparison Study of Power-Electronic-Driven Flux-Modulated Machines Using Magnetic Field and Thermal Field Co-SimulationIEEE Transactions on Industrial Electronics, 2015
- Thermal Model of Totally Enclosed Water-Cooled Permanent-Magnet Synchronous Machines for Electric Vehicle ApplicationIEEE Transactions on Industry Applications, 2015
- Thermal Investigation of Permanent-Magnet Synchronous Motor for Aerospace ApplicationsIEEE Transactions on Industrial Electronics, 2013
- Thermal Model and Analysis of Wound-Rotor Induction MachineIEEE Transactions on Industry Applications, 2013
- Thermal Analysis and Cooling System Design of Dual Mechanical Port Machine for Wind Power ApplicationIEEE Transactions on Industrial Electronics, 2012
- Multiphysics Modeling of a Permanent Magnet Synchronous Machine by Using Lumped ModelsIEEE Transactions on Industrial Electronics, 2011
- Development and Validation of a Thermal Model for Electric Induction MotorsIEEE Transactions on Industrial Electronics, 2010
- Evolution and Modern Approaches for Thermal Analysis of Electrical MachinesIEEE Transactions on Industrial Electronics, 2009
- A Coupled Thermal–Electromagnetic Analysis for a Rapid and Accurate Prediction of IM PerformanceIEEE Transactions on Industrial Electronics, 2008