Density and Viscosity Models for Two-Phase Homogeneous Hydrodynamic Damper Fluids
Authors:
- 1 January 1986
- journal article
- research article
- Published by Taylor & Francis in A S L E Transactions
- Vol. 29 (3) , 361-369
Abstract
Theoretical cavitation models previously adopted in analyzing dynamically loaded hydrodynamic bearings or squeeze-film dampers are inconsistent with experimental observations in that bubbles, once formed, in many instances do not completely redissolve upon the reappearance of high pressure. A more representative approach could be to model the lubricant as a homogeneous two-phase gas-liquid mixture. The density and viscosity of such a homogeneous mixture are developed as functions of the pressure and the known mole fraction of the noncondensable gas to the liquid at supply entry. Omitting the possible effects of surface tension, it is shown that if the vapor pressure of the lubricant is of the order of 10−3 atm or less, it has only a minimal effect on the density of the mixture and may be ignored. On the other hand, solubility effects may be significant, though it is unknown to what extent gases, once drawn out of solution, will redissolve in the short time of the cycle period of the dynamic loading. Hence, the density and viscosity relationships assume the extreme cases of either (1) solubility equilibrium, the so-called full-collapse model or (2) no solubility over a cycle period, the so-called non-collapse model. Also, isothermal or adiabatic or, indeed, polytropic gas behavior may be specified. The final density and viscosity are of the form where they may be gainfully utilized in obtaining so-lutions to the compressible Reynolds equation for dynamically loaded bearings.Keywords
This publication has 13 references indexed in Scilit:
- Cavitation in an Oscillatory Oil Squeeze FilmJournal of Tribology, 1984
- Investigation of a Rotor Bearing Assembly Incorporating a Squeeze-Film Damper BearingJournal of Mechanical Engineering Science, 1982
- Effect of air bubbles on externally pressurized bearing performanceWear, 1980
- Cavitation in BearingsAnnual Review of Fluid Mechanics, 1979
- The Role of Subatmospheric Film Pressures in the Vibration Performance of Squeeze-Film BearingsJournal of Mechanical Engineering Science, 1978
- Metastability of phase transitions and the tensile strength of liquidsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1977
- Limiting negative pressure of water under dynamic stressingJournal of Physics D: Applied Physics, 1976
- A Study of Tensile Stresses in a Journal-Bearing Oil FilmJournal of Mechanical Engineering Science, 1976
- Data on the upwards annular flow of air-water mixturesChemical Engineering Science, 1965
- Frictional pressure drop in two‐phase flow: B. An approach through similarity analysisAIChE Journal, 1964