A modified evaluation method to reduce finite pulse time effects in flash diffusivity measurement
Authors:
- 1 December 2015
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 86 (12) , 124902
Abstract
A modified evaluation method for laser flash is proposed. In this method, the moment of laser-heating cutoff time is considered as zero point. The penetration depth and formula equation of the sample temperature distribution are obtained with the approximate analytical solution before time zero (during laser heating) for the physical model of a continuously heated half-infinite, well-distributed sample. The weighted-average and approximate-equation methods are then used to quantitatively determine the laser effect depth, which leads to the formulation of a modified evaluation method in flash thermal diffusivity measurement. Results of the simulation calculations and experiments confirm the correctness of the modified method, which remarkably increases flash method applications. The modified method is applicable only to cases in which δ(x) does not exceed the sample thickness ( ) during laser heating.
Keywords
Funding Information
- Innovation Fund of SICCAS (Y37ZC4143G)
- Shanghai Technical Platform for Testing and Characterization on Inorganic Materials (14DZ2292900)
- National Natural Science Foundation of China (51006116)
This publication has 16 references indexed in Scilit:
- Some approaches for obtaining better data for thermal diffusivities of thin materials measured by the laser-flash methodHigh Temperatures-High Pressures, 2000
- Effects of finite absorption depth and infrared detector nonlinearity on thermal diffusivity measurement of thin films using the flash methodReview of Scientific Instruments, 1995
- The effects of a finite pulse time in the flash thermal diffusivity methodInternational Journal of Thermophysics, 1993
- Pulse method of measuring thermal diffusivity and optical absorption depth for partially transparent materialsJournal of Applied Physics, 1988
- Corrections for nonuniform surface-heating errors in flash-method thermal-diffusivity measurementsJournal of Applied Physics, 1976
- Finite pulse-time and heat-loss effects in pulse thermal diffusivity measurementsJournal of Applied Physics, 1973
- FINITE PULSE-TIME EFFECTS IN THE FLASH DIFFUSIVITY TECHNIQUEApplied Physics Letters, 1964
- Temperature and Finite Pulse-Time Effects in the Flash Method for Measuring Thermal DiffusivityJournal of Applied Physics, 1963
- THE EFFECT OF HEAT LOSS ON THE FLASH METHOD OF DETERMINING THERMAL DIFFUSIVITYApplied Physics Letters, 1963
- Flash Method of Determining Thermal Diffusivity, Heat Capacity, and Thermal ConductivityJournal of Applied Physics, 1961