Facile Synthesis of Metal-Impregnated Sugarcane-Derived Catalytic Biochar for Ozone Removal at Ambient Temperature
Open Access
Abstract
This study presents the first attempt at employing catalytic biochar to remove ground-level ozone at ambient temperature. With the increase in human activity, ozone has become a critical inorganic pollutant that needs to be addressed, using more sustainable methods. Fe- and Mn-impregnated catalytic biochars were prepared from a sugarcane feedstock via the wet impregnation method and pyrolysis at various temperatures, where the optimum value was determined to be 550 °C. The metal-impregnated biochar samples demonstrated enhanced surface areas and pore volumes compared with the pristine biochar (SCB550), resulting in improved ozone-adsorption capacity. SCB550-Fe exhibited an ozone-adsorption capacity of 52.1 mg/g at 20 ppm, which was approximately four times higher than that of SCB550. SCB550-Fe demonstrated superior ozone-removal performance compared to SCB550-Mn; 122 mg/g capacity as opposed to 116.2 mg/g at 80 ppm, respectively. Isothermal and kinetic modeling are also presented to suggest a plausible mechanism of ozone removal by catalytic biochar. This includes physical adsorption, complexation, electrostatic interaction, and electron transfer during the redox reaction between ozone and metals. Overall, this study should provide preliminary insights into ozone removal using biochar and promote further research regarding material optimization and kinetic studies.Keywords
Funding Information
- Ministry of Science and Technology (MOST) Taiwan (109-221-E-197-017)
This publication has 75 references indexed in Scilit:
- Designing relevant biochars as soil amendments using lignocellulosic-based and manure-based feedstocksJournal of Soils and Sediments, 2013
- Production of low-cost adsorbents with tunable surface chemistry by conjunction of hydrothermal carbonization and activation processesMicroporous and Mesoporous Materials, 2013
- Impact of pyrolysis temperature and manure source on physicochemical characteristics of biocharBioresource Technology, 2012
- Preparation of sludge-based activated carbon made from paper mill sewage sludge by steam activation for dye wastewater treatmentDesalination, 2011
- The Reaction of Ozone with the Hydroxide Ion: Mechanistic Considerations Based on Thermokinetic and Quantum Chemical Calculations and the Role of HO4− in Superoxide DismutationChemistry – A European Journal, 2010
- Influence of calcination temperature on the performance of Pd–Mn/SiO2–Al2O3 catalysts for ozone decompositionJournal of Hazardous Materials, 2009
- Characteristics of hemicellulose, cellulose and lignin pyrolysisFuel, 2007
- Dynamic behaviour of activated carbon catalysts during ozone decomposition at room temperatureApplied Catalysis B: Environment and Energy, 2005
- Evaluation of Activated Carbon Filters for Removal of Ozone at the PPB LevelAIHA Journal, 1999
- Removal of ozone from air by activated carbon treatmentSeparations Technology, 1993