Characterization of High-Temperature Hierarchical Porous Mullite Washcoat Synthesized Using Aluminum Dross and Coal Fly Ash
Open Access
Abstract
Mixture of aluminum dross (AD) and coal fly ash (CFA) was used to produce high-temperature porous mullite for washcoat application. CFA is the combustion by-product of pulverized coal in a coal-fired power plant, while AD is a waste product produced in secondary aluminum refining. In this study, 80 wt% of AD and 20 wt% of CFA was used to prepare a mullite precursor (MP) via acid leaching and dry-milling. The precursor was coated on a substrate and subsequently fired at 1500 °C. The results showed that the precursor transformed to a hierarchical porous microstructure assembled by large interlocked acicular mullite crystals. The pore structures consisted of large interconnected open pores and small pores. The specific surface area of the mullite washcoat was 4.85 m2g−1 after heating at 1500 °C for 4 h. The specific surface area was compatible with the specific surface area of other high-temperature washcoats.Keywords
This publication has 20 references indexed in Scilit:
- Modified cenospheres as non-sacrificial pore-forming agent for porous mullite ceramicsCeramics International, 2019
- Titanium Dioxide as a Catalyst Support in Heterogeneous CatalysisThe Scientific World Journal, 2014
- SBA-15 Mesoporous Silica as Catalytic Support for Hydrodesulfurization Catalysts—ReviewMaterials, 2013
- High‐Porosity Acicular Mullite Ceramics For Multifunctional Diesel Particulate FiltersInternational Journal of Applied Ceramic Technology, 2011
- Comparison of rhodamine B degradation under UV irradiation by two phases of titania nano-photocatalystJournal of Thermal Analysis and Calorimetry, 2011
- γ‐Alumina as a Support for Catalysts: A Review of Fundamental AspectsEuropean Journal of Inorganic Chemistry, 2005
- Novel Method for Obtaining Corundum Layers of High Surface Area on Ceramic Supports for High‐Temperature CatalysisJournal of the American Ceramic Society, 2002
- The effect of powder characteristics on washcoat quality. Part I: Alumina washcoatsJournal of the European Ceramic Society, 2000
- Thermal stability of mesoporous silica molecular sieveJournal of Physics and Chemistry of Solids, 1999
- Development of the microstructure of the silicon nitride based ceramicsMaterials Research, 1999