Scalability of Extremely Thin SOI (ETSOI) MOSFETs to Sub-20-nm Gate Length
Authors:
- 14 December 2011
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 33 (2) , 149-151
Abstract
We report high-performance extremely thin SOI MOSFETs fabricated with a channel thickness down to 3.5 nm, sub-20-nm gate length, and contacted gate pitch of 100 nm. At an effective channel length of 18 nm, a drain-induced barrier lowering of 100 mV is achieved by either thinning the channel to 3.5 nm or by applying a reverse back-gate bias to 6-nm channel MOSFETs. Moreover, minimal increase in series resistance is seen when the channel is scaled to 3.5 nm, resulting in no performance degradation with SOI thickness scaling.Keywords
This publication has 9 references indexed in Scilit:
- On the origin of the mobility reduction in bulk-Si, UTBOX-FDSOI and SiGe devices with ultrathin-EOT dielectrics2011
- Undoped-Body Extremely Thin SOI MOSFETs With Back GatesIEEE Transactions on Electron Devices, 2009
- Gate Length and Performance Scaling of Undoped-Body Extremely Thin SOI MOSFETsIEEE Electron Device Letters, 2009
- A perspective on today’s scaling challenges and possible future directionsSolid-State Electronics, 2007
- Effect of Gate Overlap and Source/Drain Doping Gradient on 10-nm CMOS PerformanceIEEE Transactions on Electron Devices, 2006
- Nanoscale FinFETs with gate-source/drain underlapIEEE Transactions on Electron Devices, 2004
- Experimental study on carrier transport mechanism in ultrathin-body SOI nand p-MOSFETs with SOI thickness less than 5 nm2003
- The effective drive current in CMOS inverters2003
- Low field mobility of ultra-thin SOI N- and P-MOSFETs: Measurements and implications on the performance of ultra-short MOSFETs2000