Controlling Losses When Recompleting Low-Pressure Reservoirs
Authors:
- 3 June 2015
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
The challenge in many permeable water sensitive subhydrostatic reservoirs is to avoid the loss of completion fluid when completing or working over wells. It is not unusual to lose up to 1,000 bbl of completion fluid, resulting in a 20% to 50% reduction in production. Several different approaches have been used to prevent these losses. The most common is viscous fluid-loss control pills with sized particulates, such as calcium carbonate, which often requires a further treatment to remove the solids. An alternative is a solids-free crosslinked viscous polymer pill, which must be spotted and kept in position across the reservoir prior to it crosslinking. To overcome the limitation of conventional fluid-loss control pills, a low-viscosity system was developed. The system is composed of a viscous disproportionate permeability modifier (VDPM) with sized synthetic polymer particles and fibers, which, with time and temperature, degrade into organic acids. The VDPM reduces the effective permeability to the water-based fluids, and the sized particles create an impermeable filter cake. When the particles degrade, the organic acid acts to break any remaining polymer. The system can either be bullheaded or spotted in the wellbore prior to perforating and effectively seals the formation for several days. The fluid-loss pill has been used successfully in more than 25 wells. The volume of fluid lost into the formation is often less than 1 bbl, and production is maintained after the workover. The technique has made it possible to selectively stimulate new intervals or recomplete wells with an average increase of more than 240 BOPD, whereas, historically, a decline in production was not uncommon.Keywords
This publication has 27 references indexed in Scilit:
- Development of Environmentally Friendly Lost Circulation Materials for Riserless Drilling2012
- Temporary Zonal Isolation Minimizes Reservoir Damage During Workover Operations in Ecuador2011
- Bridging Particle Size Distribution in Drilling Fluid and Formation Damage2011
- Selective Stimulation and Water Control in High-Water-Cut Wells: Case Histories from Upper Magdalena Valley Basin in Colombia2011
- Increasing Oil Production without Increasing Water Cut in Wells in Ecuador2011
- Development of a New Completion Fluid Using Polyglycolic Acid Powder2010
- Solids-Free Viscoelastic Fluid Loss Pills and Dynamic Underbalance Improve Productivity from Newly Perforated Wells2010
- Combining Stimulation and Water Control in High-Water-Cut Wells2010
- Polymers as relative permeability modifiers: adsorption and the dynamic formation of thick polyacrylamide layersJournal of Petroleum Science and Engineering, 2004
- Permeability-Dependent Propagation of Polyacrylamides Under Near-Wellbore Flow Conditions1995