Development of BioPolyurethane Coatings from Biomass-Derived Alkylphenol Polyols—A Green Alternative
Open Access
Abstract
Bio-based polyols were obtained from the thermochemical liquefaction of two biomass feedstocks, pinewood and Stipa tenacissima, with conversion rates varying between 71.9 and 79.3 wt.%, and comprehensively characterized. They exhibit phenolic and aliphatic moieties displaying hydroxyl (OH) functional groups, as confirmed by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and nuclear magnetic resonance spectroscopy (NMR) analysis. The biopolyols obtained were successfully employed as a green raw material to produce bio-based polyurethane (BioPU) coatings on carbon steel substrates, using, as an isocyanate source, a commercial bio-based polyisocyanate—Desmodur® Eco N7300. The BioPU coatings were analyzed in terms of chemical structure, the extent of the reaction of the isocyanate species, thermal stability, hydrophobicity, and adhesion strength. They show moderate thermal stability at temperatures up to 100 °C, and a mild hydrophobicity, displaying contact angles between 68° and 86°. The adhesion tests reveal similar pull-off strength values (ca. 2.2 MPa) for the BioPU either prepared with pinewood and Stipa-derived biopolyols (BPUI and BPUII). Electrochemical impedance spectroscopy (EIS) measurements were carried out on the coated substrates for 60 days in 0.05 M NaCl solution. Good corrosion protection properties were achieved for the coatings, with particular emphasis on the coating prepared with the pinewood-derived polyol, which exhibited a low-frequency impedance modulus normalized for the coating thickness of 6.1 × 1010 Ω cm at the end of the 60 days test, three times higher than for coatings prepared with Stipa-derived biopolyols. The produced BioPU formulations show great potential for application as coatings, and for further modification with bio-based fillers and corrosion inhibitors.Keywords
Funding Information
- Qatar National Research Fund (NPRP13S-0120-200116, UIDB/00100/2020, UIDP/00100/2020, UIDB/04028/2020)
- Fundação para a Ciência e a Tecnologia (NPRP13S-0120-200116, UIDB/00100/2020, UIDP/00100/2020, UIDB/04028/2020)
- Fundação para a Ciência e a Tecnologia (NPRP13S-0120-200116, UIDB/00100/2020, UIDP/00100/2020, UIDB/04028/2020)
This publication has 88 references indexed in Scilit:
- Biomass acid-catalyzed liquefaction – Catalysts performance and polyhydric alcohol influenceData in Brief, 2015
- Recent progress in the direct liquefaction of typical biomassProgress in Energy and Combustion Science, 2015
- Polyurethane Coatings Based on Chemically Unmodified Fractionated LigninACS Sustainable Chemistry & Engineering, 2015
- Synthesis of 2-methyl tetrahydrofuran from various lignocellulosic feedstocks: Sustainability assessment via LCAResources, Conservation and Recycling, 2015
- Liquefaction of major lignocellulosic biomass constituents in supercritical ethanolEnergy, 2015
- Study on Effects of Different Operating Parameters on the Pyrolysis of Biomass: A ReviewJournal of Biofuels and Bioenergy, 2015
- 2‐Methyltetrahydrofuran (2‐MeTHF): A Biomass‐Derived Solvent with Broad Application in Organic ChemistryChemSusChem, 2012
- Characterization of Various Fast-Pyrolysis Bio-Oils by NMR Spectroscopy†Energy & Fuels, 2009
- Direct Liquefaction of BiomassChemical Engineering & Technology, 2008
- Analysis on residue formation during wood liquefaction with polyhydric alcoholJournal of Wood Science, 2004