Rapid Compression Machine Measurements of Ignition Delays for Primary Reference Fuels
Authors:
- 1 February 1990
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
A rapid compression machine for chemical kinetic studies has been developed. The design objectives of the machine were to obtain: 1)uniform well-defined core gas; 2) laminar flow condition; 3) maximum ratio of cooling to compression time; 4) side wall vortex containment; and, 5) minimum mechanical vibration. A piston crevice volume was incorporated to achieve the side wall vortex containment. Tests with inert gases showed the post-compression pressure matched with the calculated laminar pressure indicating that the machine achieved these design objectives. Measurements of ignition delays for homogeneous PRF/O2/N2/Ar mixture in the rapid compression machine have been made with five primary reference fuels (ON 100, 90, 75, 50, and 0) at an equivalence ratio of 1, a diluent (s)/oxygen ratio of 3.77, and two initial pressures of 500 Torr and 1000 Torr. Post-compression temperatures were varied by blending Ar and N2 in different ratios. It was found that the ignition delays were not a linear function of the ON of the fuel. Within the experimental range covered, the first-stage ignition delays decreased rapidly as the temperature increased, whereas the second-stage ignition delays stayed unchanged as the temperature increased. Comparison with existing data showed that the ignition delay measurements made in other RCM's should be carefully reevaluated partially due to their high heat transfer characteristics and partially due to their improper mixture preparation procedures.Keywords
This publication has 10 references indexed in Scilit:
- A detailed chemical kinetic reaction mechanism for the oxidation of iso-octane and n-heptane over an extended temperature range and its application to analysis of engine knockSymposium (International) on Combustion, 1989
- Autoignition of Adiabatically Compressed Combustible Gas MixturesSAE International Journal of Advances and Current Practices in Mobility, 1987
- Internal Combustion Engine in Theory and Practice1985
- Thermal boundary layer in a gas subject to a time dependent pressureLetters in Heat and Mass Transfer, 1981
- The autoignition of hydrocarbon fuels at high temperatures and pressures—Fitting of a mathematical modelCombustion and Flame, 1977
- A mathematical model for hydrocarbon autoignition at high pressuresProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1975
- High Reynolds number flow in a moving cornerJournal of Fluid Mechanics, 1970
- An Opposed Piston Rapid Compression Machine for Preflame Reaction StudiesProceedings of the Institution of Mechanical Engineers, 1968
- IGNITION OF FUELS BY RAPID COMPRESSIONSAE International Journal of Advances and Current Practices in Mobility, 1950
- Entzündung von Kohlenwasserstoff‐Luft‐Gemischen durch adiabatische VerdichtungBerichte der Bunsengesellschaft für physikalische Chemie, 1949