Asphalt Surface Mixtures with Improved Performance Using Waste Polymers via Dry and Wet Processes
- 1 October 2017
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 29 (10)
Abstract
The mechanical performance of a typical surface course mixture, modified with two different plastic wastes, both via the wet and dry processes, was evaluated in this study. Water sensitivity, rutting resistance, stiffness modulus, and fatigue cracking resistance tests were used. The results obtained indicated that the polymer-modified mixtures showed similar or improved performance when compared with that of a conventional control mixture produced with a harder virgin grade bitumen, not always available, or available at higher costs, in several countries. Thus, modifying asphalt mixtures with these plastic wastes can be an economical and ecological alternative for paving works. Moreover, the mixtures produced via the dry process showed increased water sensitivity and stiffness modulus properties. This holds out new possibilities for use of polymer-modified mixtures, especially in developing countries, because it widens the possibility of using locally available bitumen, of variable quality, for producing mixtures with higher performance. This can be achieved at real scale with no major extra costs because the dry process does not require modification of typical asphalt plants.Keywords
This publication has 23 references indexed in Scilit:
- Mechanical and Environmental Suitability of Recycled Concrete Aggregate as a Highway Base MaterialJournal of Materials in Civil Engineering, 2016
- Use of Reclaimed Geomembranes for Modification of Mechanical Performance of Bituminous BindersJournal of Materials in Civil Engineering, 2016
- Performance of Warm Mix Recycled Asphalt containing up to 100% RAPConstruction and Building Materials, 2016
- Effect of Waste Plastic and Waste Tires Ash on Mechanical Behavior of BitumenJournal of Materials in Civil Engineering, 2016
- Recycled construction and demolition waste in Cold Asphalt Mixtures: evolutionary propertiesJournal of Cleaner Production, 2016
- Recycled asphalt mixtures produced with high percentage of different waste materialsConstruction and Building Materials, 2015
- Traditional and Dissipated Energy approaches to compare the 2PB and 4PB flexural methodologies on a Warm Mix AsphaltConstruction and Building Materials, 2013
- Performance evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphaltConstruction and Building Materials, 2012
- Using waste plastic bottles as additive for stone mastic asphaltMaterials & Design (1980-2015), 2011
- Effects of polymer modification on the fuel resistance of asphalt bindersFuel, 2009