Abstract
The aim of this study is to develop and test a technological workflow for applying SLAM technology to the creation and updating of digital topographic plans at scales 1:500–1:5000 using the method of Simultaneous Localization and Mapping (SLAM) on the territory of the campus of Kyiv National University of Construction and Architecture (KNUCA). The authors propose a combined methodology for performing topographic surveying based on mobile terrestrial laser scanning, which integrates the advantages of modern portable SLAM systems and traditional geodetic techniques. The workflow for collecting, registering, and processing geospatial data obtained with a SLAM scanner is described in detail, as well as the procedures for geodetic referencing to the established control network. Special attention is given to analyzing factors that influence the accuracy and stability of point cloud registration. In particular, it was determined that data quality is significantly affected by the duration of the scanning session, the complexity of the survey path, the presence of moving objects within the survey area, and the density of laser returns in complex environments. Trajectory optimization and point cloud adjustment were performed in LixelStudio software using identified control and reference points. The results demonstrate that the resulting point cloud and derived models fully comply with the requirements of the current Procedure for Topographic Surveying at scales 1:5000, 1:2000, 1:1000, and 1:500, confirming the feasibility of practical implementation of SLAM technology for modern topographic and geodetic tasks.