Cationic Surfactant-Modified Tetraselmis sp. for the Removal of Organic Dyes from Aqueous Solution
Open Access
- 29 November 2023
- Vol. 28 (23) , 7839
Abstract
The modification of the Tetraselmis sp. algae material (Tetra-Alg) with surfactant Cethyltrimethylammonium Bromide (CTAB) yielded adsorbent Tetra-Alg-CTAB as an adsorbent of methyl orange (MO) and methylene blue (MB) solutions. The characterization of the adsorbent used an infrared (IR) spectrometer to identify functional groups and Scanning Electron Microscopy with Energy Dispersive X-ray (SEM-EDX FEI Inspect-S50, Midland, ON, Canada) to determine the surface morphology and elemental composition. Methyl orange and methylene blue adsorption on the adsorbent Tetra-Alg, Tetraselmis sp. algae-modified Na+ ions (Tetra-Alg-Na), and Tetra-Alg-CTAB were studied, including variations in pH, contact time, concentration, and reuse of adsorbents. The adsorption of MO and MB by Tetra-Alg-CTAB at pH 10, during a contact time of 90 min, and at a concentration of 250 mg L−1 resulted in MO and MB being absorbed in the amounts of 128.369 and 51.013 mg g−1, respectively. The adsorption kinetics and adsorption isotherms of MO and MB and Tetra-Alg, Tetra-Alg-Na, and Tetra-Alg-CTAB tend to follow pseudo-second-order kinetics models and Freundlich adsorption isotherms with each correlation coefficient value (R2) approaching 1. Due to the modification with the cationic surfactant CTAB, anionic dyes can be strongly sorbed in alkaline pH due to strong electrostatic attraction, while MB is more likely to involve cation exchange and hydrogen bonding. The reuse of Tetra-Alg-CTAB was carried out four times with adsorption percent > 70%, and the adsorbent was very effective in the adsorption of anionic dyes such as MO.Keywords
Funding Information
- Higher Education for Technology and Innovation (HETI) Project at Universitas Lampung based on the Research Innovation and Collaboration Program 2023 (10606/UN26/KS.00.00/2023)
This publication has 54 references indexed in Scilit:
- Electrospun mesoporous carbon nanofibers produced from phenolic resin and their use in the adsorption of large dye moleculesCarbon, 2012
- Ultrafiltration technology with a ceramic membrane for reactive dye removal: Optimization of membrane performanceJournal of Hazardous Materials, 2012
- Kinetic, Isotherm, and Thermodynamic Studies of the Adsorption of Methyl Orange from Aqueous Solution by Chitosan/Alumina CompositeJournal of Chemical & Engineering Data, 2011
- Removal of methylene blue from aqueous solution with magnetite loaded multi-wall carbon nanotube: Kinetic, isotherm and mechanism analysisJournal of Hazardous Materials, 2011
- Extraction and separation studies of silver(I) and copper(II) from their aqueous solution using chemically modified melamine resinsHydrometallurgy, 2009
- Removal of Cr(VI) and As(V) from aqueous solutions by HDTMA-modified zeolite YJournal of Hazardous Materials, 2009
- Biosorption of chromate anions from aqueous solution by a cationic surfactant-modified lichen (Cladonia rangiformis (L.))Journal of Hazardous Materials, 2009
- Removal of synthetic dyes from wastewaters: a reviewEnvironment International, 2004
- Kinetic Modeling of Copper Biosorption by Immobilized BiomassIndustrial & Engineering Chemistry Research, 1998
- Binding of metal ions by particulate biomass derived from Chlorella vulgaris and Scenedesmus quadricaudaEnvironmental Science & Technology, 1990