Numerical study on slurry-induced fracturing pressure of cohesive soil
Authors:
- 1 January 2025
- journal article
- research article
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 62, 1-23
Abstract
The stability of the tunnel face during the slurry shield tunnelling is controlled by the slurry pressure in the slurry chamber, and excessive slurry pressure will cause fracturing on excavation face. To prevent the occurrence of slurry fracturing, it is necessary to conduct a detailed study on the slurry support pressure when the slurry fracturing occurs. In this study, the hydraulic fracturing experiment of cohesive soil samples was carried out by the self-developed hydraulic fracturing device, and the improved extended finite element method (XFEM) was used to simulate the experiment process. The influence of various factors on the fracturing pressure was analyzed, and the accuracy of the numerical simulation method was also verified. In addition, the calculation method of fracturing pressure of soft cohesive soil is obtained by fitting the influence of each factor. The results show that the improved XFEM can accurately simulate the shear failure of soft cohesive soil. The fracturing pressure increases linearly with the increase in the circumferential pressure, indicating that a higher overburden of the tunnel can help resist the initial fracturing induced by shield tunneling. The fracturing pressure increases with an increase in the unconfined compressive strength as well as the slurry viscosity. Based on the regression analysis of the numerical results, an empirical approach was proposed for estimating the slurry-induced fracturing of soil.Keywords
Funding Information
- Beijing Nova Program (20220484037)
- National Natural Science Foundation of China (52008021)
This publication has 24 references indexed in Scilit:
- A combined XFEM phase-field computational model for crack growth without remeshingComputational Mechanics, 2020
- An adaptively refined XFEM with virtual node polygonal elements for dynamic crack problemsComputational Mechanics, 2018
- Predicting band structure of 3D mechanical metamaterials with complex geometry via XFEMComputational Mechanics, 2015
- A mesh-independent finite element formulation for modeling crack growth in saturated porous media based on an enriched-FEM techniqueInternational Journal of Fracture, 2014
- Density and level set-XFEM schemes for topology optimization of 3-D structuresComputational Mechanics, 2014
- XFEM with equivalent eigenstrain for matrix–inclusion interfacesComputational Mechanics, 2013
- Goal-oriented explicit residual-type error estimates in XFEMComputational Mechanics, 2012
- Some numerical issues on the use of XFEM for ductile fractureComputational Mechanics, 2012
- A two-scale model for fluid flow in an unsaturated porous medium with cohesive cracksComputational Mechanics, 2007
- Propagation of fluid-driven fractures in jointed rock. Part 1—development and validation of methods of analysisInternational Journal of Rock Mechanics and Mining Sciences, 1990