Electrostatic shield effect: an effective way to suppress dissolution of polysulfide anions in lithium–sulfur battery
- 31 July 2014
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 2 (38) , 15938-15944
Abstract
Sulfur has a very high theoretical specific capacity of 1672 mA h g−1 when used in lithium–sulfur batteries. However, the particularly rapid capacity reduction owing to the dissolution of intermediate polysulfide anions into the electrolyte still hinders practical application. In this respect, we report a novel core–shell structured sulfur–poly(sodium p-styrenesulfonate) (S@PSS) composite cathode material with a sulfur content as high as 93 wt% for lithium–sulfur batteries, which is the highest sulfur content disclosed in the literature. Due to the effective transport of lithium cations while blocking polysulfide anions by common ion Coulombic repulsion of the negatively charged –SO3 − groups in the PSS protective layer, the S@PSS composite cathode exhibits a high initial specific capacity of 1159 mA h g−1 at a 0.1 C rate, and retains a stable discharge capacity of 972 mA h g−1 after 70 cycles and 845 mA h g−1 after 120 cycles with a high Coulombic efficiency of over 99%. To our knowledge, this new methodology for lithium–sulfur cathodes has not been reported so far; the initial specific capacity is the highest value calculated based on total composite mass, which has not been disclosed in the literature.Keywords
This publication has 42 references indexed in Scilit:
- Significantly Improved Long-Cycle Stability in High-Rate Li–S Batteries Enabled by Coaxial Graphene Wrapping over Sulfur-Coated Carbon NanofibersNano Letters, 2013
- Chemically tailoring the nanostructure of graphenenanosheets to confine sulfur for high-performance lithium-sulfur batteriesJournal of Materials Chemistry A, 2012
- A new approach to improve cycle performance of rechargeable lithium–sulfur batteries by inserting a free-standing MWCNT interlayerChemical Communications, 2012
- High capacity vertical aligned carbon nanotube/sulfur composite cathodes for lithium–sulfur batteriesChemical Communications, 2012
- High-rate lithium–sulfur batteries promoted by reduced graphene oxide coatingChemical Communications, 2012
- Sulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur BatteriesNano Letters, 2011
- Graphene-Wrapped Sulfur Particles as a Rechargeable Lithium–Sulfur Battery Cathode Material with High Capacity and Cycling StabilityNano Letters, 2011
- A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteriesNature Materials, 2009
- Preparation and electrochemical properties of sulfur–acetylene black composites as cathode materialsElectrochimica Acta, 2009
- A Solid Sulfur Cathode for Aqueous BatteriesScience, 1993