Acoustic emissions in directed energy deposition processes
Open Access
- 7 January 2022
- journal article
- research article
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 119 (5-6) , 3517-3532
Abstract
Acoustic emissions in directed energy deposition processes such as wire arc additive manufacturing and directed energy deposition with laser beam/metal are investigated within this work, as many insights about the process can be gained from this. In both processes, experienced operators can hear whether a process is running stable or not. Therefore, different experiments for stable and unstable processes with common process anomalies were carried out, and the acoustic emissions as well as process camera images were captured. Thereby, it was found that stable processes show a consistent mean intensity in the acoustic emissions for both processes. For wire arc additive manufacturing, it was found that by the Mel spectrum, a specific spectrum adapted to human hearing, the occurrence of different process anomalies can be detected. The main acoustic source in wire arc additive manufacturing is the plasma expansion of the arc. The acoustic emissions and the occurring process anomalies are mainly correlating with the size of the arc because that is essentially the ionized volume leading to the air pressure which causes the acoustic emissions. For directed energy deposition with laser beam/metal, it was found that by the Mel spectrum, the occurrence of an unstable process can also be detected. The main acoustic emissions are created by the interaction between the powder and the laser beam because the powder particles create an air pressure through the expansion of the particles from the solid state to the liquid state when these particles are melted. These findings can be used to achieve an in situ quality assurance by an in-process analysis of the acoustic emissions.Keywords
Funding Information
- European Institute of Innovation and Technology (18079)
- Bayerisches Staatsministerium für Bildung und Kultus, Wissenschaft und Kunst (IUK-1905-0013)
- Vetenskapsrådet (2020-04250)
- Lulea University of Technology
This publication has 23 references indexed in Scilit:
- Additive manufacturing of metallic components – Process, structure and propertiesProgress in Materials Science, 2018
- Cold metal transfer (CMT) technology - An overviewDefence Technology, 2018
- Wire arc additive manufacturing of Al-6Mg alloy using variable polarity cold metal transfer arc as power sourceMaterials Science and Engineering: A, 2018
- Ni Based Powder Reconditioning and Reuse for LMD ProcessPhysics Procedia, 2016
- Global rate coefficients for ionization and recombination of carbon, nitrogen, oxygen, and argonPhysics of Plasmas, 2012
- Monitoring Gas Metal Arc Welding Process by Using Audible Sound SignalStrojniški vestnik - Journal of Mechanical Engineering, 2011
- Investigation on arc sound and metal transfer modes for on-line monitoring in pulsed gas metal arc weldingJournal of Materials Processing Technology, 2010
- Thermophysical Properties of a Chromium–Nickel–Molybdenum Steel in the Solid and Liquid PhasesInternational Journal of Thermophysics, 2007
- Feasibility study of acoustic signals for on-line monitoring in short circuit gas metal arc weldingInternational Journal of Machine Tools and Manufacture, 2004
- Computing Mel-frequency cepstral coefficients on the power spectrum2001