Microwave Dual-Crack Sensor with a High Q-Factor Using the TE20 Resonance of a Complementary Split-Ring Resonator on a Substrate-Integrated Waveguide
Open Access
- 28 February 2023
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 14 (3) , 578
Abstract
Microwave sensors have attracted interest as non-destructive metal crack detection (MCD) devices due to their low cost, simple fabrication, potential miniaturization, noncontact nature, and capability for remote detection. However, the development of multi-crack sensors of a suitable size and quality factor (Q-factor) remains a challenge. In the present study, we propose a multi-MCD sensor that combines a higher-mode substrate-integrated waveguide (SIW) and complementary split-ring resonators (CSRRs). In order to increase the Q-factor, the device is miniaturized; the MCD is facilitated; and two independent CSRRs are loaded onto the SIW, where the electromagnetic field is concentrated. The concentrated electromagnetic field of the SIW improves the Q-factor of the CSRRs, and each CSRR creates its own resonance and produces a miniaturizing effect by activating the sensor below the cut-off frequency of the SIW. The proposed multi-MCD sensor is numerically and experimentally demonstrated for cracks with different widths and depths. The fabricated sensor with a TE20-mode SIW and CSRRs is able to efficiently detect two sub-millimeter metal cracks simultaneously with a high Q-factor of 281.Keywords
Funding Information
- National Research Foundation of Korea (2021R1A2C3005239, 2021R1A4A2001316)
- Chung-Ang University Research Scholarship (2021R1A2C3005239, 2021R1A4A2001316)
This publication has 83 references indexed in Scilit:
- High-Q and miniaturized complementary split ring resonator-loaded substrate integrated waveguide microwave sensor for crack detection in metallic materialsSensors and Actuators A: Physical, 2014
- Crack detection sensor layout and bus configuration analysisSmart Materials and Structures, 2014
- Passive wireless antenna sensor for strain and crack sensing—electromagnetic modeling, simulation, and testingSmart Materials and Structures, 2013
- A Nonlinear Acoustic Technique for Crack Detection in Metallic StructuresStructural Health Monitoring, 2009
- In Situ Fatigue Crack Detection using Piezoelectric Paint SensorJournal of Intelligent Material Systems and Structures, 2006
- Experiments on evanescent-wave amplification and transmission using metamaterial structuresPhysical Review B, 2006
- Babinet Principle Applied to the Design of Metasurfaces and MetamaterialsPhysical Review Letters, 2004
- Monitoring of fatigue crack growth of cracked thick aluminum plate repaired with a bonded composite patch using transmission-type extrinsic Fabry Perot interferometric optical fiber sensorsSmart Materials and Structures, 2002
- Crack detection and recognition using an eddy current differential probeIEEE Transactions on Magnetics, 1999
- Magnetism from conductors and enhanced nonlinear phenomenaIEEE Transactions on Microwave Theory and Techniques, 1999