A New Continuous Bending and Straightening Curve Based on the High-Temperature Creep Property of a Low-Alloy Steel Continuous Casting Slab
Open Access
Abstract
The existing continuous caster layout curves cause plastic deformation of slabs during bending and straightening segments, while no effective deformation occurs in the basic arc segment, which tends to induce defects, such as cracks, and compromise slab quality. High-temperature creep deformation is generally regarded as detrimental to material performance. If the significant and inevitable creep deformation of a slab could be utilized to accomplish bending and straightening deformation during continuous casting, it would turn a potential harm into an advantage, ultimately enhancing both production efficiency and final product quality. Therefore, a new continuous bending and straightening curve based on the high-temperature creep property of a low-alloy steel slab was designed. The new curve cancelled the original basic arc segment and smoothly connected the bending and straightening segments, which not only substantially prolonged the effective bending and straightening deformation time but also extended the creep time. The locations within the slab corresponding to the temperature range of 1100 °C to 1200 °C were obtained from the simulated temperature field results. Comparing the calculated strain rates with the steady-state creep rates revealed that within the temperature range exhibiting favorable hot ductility, the bending and straightening deformation of the slab could be accomplished entirely through creep deformation.Keywords
Funding Information
- Weifang University (2023BS34)
This publication has 15 references indexed in Scilit:
- A review of dynamic flexible regulation strategies for multi-energy coupled steelmaking-continuous casting productionEngineering Applications of Artificial Intelligence, 2025
- On the high-temperature creep and fatigue behaviours of an advanced hot-extruded nickel-based superalloyMaterials & Design, 2025
- Creep behavior and microstructure evolution of a novel Ni-Co-based superalloy with long-life designed for high temperature applicationMaterials Science and Engineering: A, 2025
- Micromechanical behavior and microcrack evolution in continuous casting slab: Experimental characterization, multiscale simulation and industrial validationJournal of Materials Processing Technology, 2025
- High-temperature creep behavior and creep mechanism of in situ (ZrB2+Al2O3)np/7055 Al nanocompositesJournal of Alloys and Compounds, 2024
- Prediction model for crack sensitive temperature region and phase fractions of slab under continuous casting cooling rates based on finite number of experimentsJournal of Materials Research and Technology, 2022
- Research Mechanism of Formation on Transverse Corner Cracks in the Continuous Casting Slab of Peritectic SteelSteel Research International, 2022
- Tensile creep behavior of HfNbTaTiZr refractory high entropy alloy at elevated temperaturesActa Materialia, 2022
- Study on the creep behavior and microstructure evolution of a low alloy steel in continuous casting processingMaterials Science and Engineering: A, 2022
- Estimation of heat transfer coefficients in continuous casting under large disturbance by Gaussian kernel particle swarm optimization methodInternational Journal of Heat and Mass Transfer, 2017