Investigation of the Powder Aerosol Deposition Method Using Shadowgraph Imaging
Open Access
Abstract
The powder aerosol deposition method (PAD) is a vacuum-based spray coating technology. It allows for production of highly dense coatings at room temperature, especially of brittle-breaking materials. This yields new options for coating substrate materials that even melt at low temperatures. The film formation mechanism is called room temperature impact consolidation (RTIC). The occurrence of this mechanism is strongly linked to the gas jet used in the process. The velocity and direction of the particles in the gas jet forming between the nozzle orifice and the substrate are the main factors influencing the quality of the coating. This dependency aimed to be elaborated with a measurement setup and coating experiments and is shown in this work. We investigated the gas jet formation using a shadow optical imaging system. Regions of different gas density are visualized by this technique. Several parameter sets, in particular gas flow rates and chamber pressures, were investigated. In addition, coatings were produced on glass substrates with the same parameters. As a coating material, the superconducting ceramic-like magnesium diboride (MgB2) was chosen. A correlation between shadow images and thickness profiles of the coatings shows how the gas jet formation affects the uniformity of thickness. Shadow optical images provide valuable information on the flight direction of the particles and allow validation of simulation results.Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt (03SF0480A)
This publication has 27 references indexed in Scilit:
- What Happens during Thermal Post‐Treatment of Powder Aerosol Deposited Functional Ceramic Films? Explanations Based on an Experiment‐Enhanced Literature SurveyAdvanced Materials, 2020
- Powder aerosol deposition method — novel applications in the field of sensing and energy technologyFunctional Materials Letters, 2019
- The Aerosol Deposition Method: A Modified Aerosol Generation Unit to Improve Coating QualityMaterials, 2018
- Superconducting Properties of Thick Films on Hastelloy Prepared by the Aerosol Deposition Method With Ex Situ MgB2 PowderIEEE Transactions on Applied Superconductivity, 2017
- Room Temperature Deformation Mechanisms of Alumina Particles Observed from In Situ Micro-compression and Atomistic SimulationsJournal of Thermal Spray Technology, 2015
- Influence of Carrier Gas Composition on the Stress of Al2O3 Coatings Prepared by the Aerosol Deposition MethodMaterials, 2014
- Fabrication and Properties of MgB2 Coated Superconducting TapesJournal of Superconductivity and Novel Magnetism, 2012
- Room Temperature Impact Consolidation (RTIC) of Fine Ceramic Powder by Aerosol Deposition Method and Applications to MicrodevicesJournal of Thermal Spray Technology, 2008
- Overview of MgB 2 Superconductor ApplicationsInternational Journal of Applied Ceramic Technology, 2007
- Aerosol Deposition Method for Fabrication of Nano Crystal Ceramic LayerMaterials Science Forum, 2004