Investigation on the high velocity impact properties of glass-reinforced fiber metal laminates
- 28 June 2012
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 47 (13) , 1605-1615
Abstract
The resistance of glass-reinforced laminates with different thickness ratio (ratio of glass/epoxy plies thickness to aluminum sheets thickness) subjected to high-velocity impact is investigated experimentally and analytically. The tests are carried out by a light gas gun and a 14 g blunt cylindrical projectile. The ballistic limit velocity and specific perforation energy is used for comparing results. The failure mechanisms that absorbed projectile’s energy during perforation process are studied by examining the damaged samples. This examining helped us to derive an analytical expression to predict the ballistic limit and specific perforation energy. The good agreement between experimental and analytical results shows well mathematical modeling. The results indicate that global deformation of aluminum sheets had the most effect on absorbing energy. Increasing the number of composite plies may enhance the absorbed energy of a fiber metal laminate but also increases weight and cause to be away from the optimum condition. Besides these two procedures, a numerical analysis is done and the results compared with previous ones and are commented upon.Keywords
This publication has 23 references indexed in Scilit:
- A review: Fibre metal laminates, background, bonding types and applied test methodsMaterials & Design (1980-2015), 2011
- Scaling Effects in the Low Velocity Impact Response of Fiber-Metal LaminatesJournal of Reinforced Plastics and Composites, 2008
- An Experimental Investigation on the Impact Response of Fiberglass/Aluminum CompositesJournal of Reinforced Plastics and Composites, 2007
- The impact properties and damage tolerance and of bi-directionally reinforced fiber metal laminatesJournal of Materials Science, 2007
- The mechanical behavior of GLARE laminates for aircraft structuresJOM, 2005
- Post-impact fatigue damage growth in fiber?metal laminatesInternational Journal of Fatigue, 2002
- Development of fibre metal laminates for advanced aerospace structuresJournal of Materials Processing Technology, 2000
- Effects of fibre/matrix adhesion on carbon-fibre-reinforced metal laminates—II. impact behaviourComposites Science and Technology, 1998
- Impact loading on fibre metal laminatesInternational Journal of Impact Engineering, 1996
- Impact properties of Fibre Metal LaminatesComposites Engineering, 1993