Modeling of Precipitation Hardening during Coiling of Nb–Mo Steels
Open Access
Abstract
Nb–Mo low-alloyed steels are promising advanced high strength steels (AHSS) because of the highly dislocated bainitic ferrite microstructure conferring an excellent combination of strength and toughness. In this study, the potential of precipitation strengthening during coiling for hot-strip Nb–Mo-bearing low-carbon steels has been investigated using hot-torsion and aging tests to simulate the hot-rolling process including coiling. The obtained microstructures were characterized using electron backscatter diffraction (EBSD), highlighting the effects of Nb and Mo additions on formation and tempering of the bainitic ferrite microstructures. Further, the evolution of nanometer-sized precipitates was quantified with high-resolution transmission electron microscopy (HR-TEM). The resulting age hardening kinetics have been modelled by combining a phenomenological precipitation strengthening model with a tempering model. Analysis of the model suggests a narrower coiling temperature window to maximize the precipitation strengthening potential in bainite/ferrite high strength low-alloyed (HSLA) steels than that for conventional HSLA steels with polygonal ferrite/pearlite microstructures.Keywords
Funding Information
- Companhia Brasileira de Metalurgia e Mineração (11R21981)
This publication has 24 references indexed in Scilit:
- Generalization of the existing relations between microstructure and yield stress from ferrite–pearlite to high strength steelsMaterials Science and Engineering: A, 2013
- General relationship between strength and hardnessMaterials Science and Engineering: A, 2011
- The comparative effectiveness of Nb solute and NbC precipitates at impeding grain-boundary motion in Nb steelsScripta Materialia, 2008
- Modelling the precipitation of NbC on dislocations in α-FeActa Materialia, 2007
- Hall–Petch relation and boundary strengtheningScripta Materialia, 2004
- Microstructure evolution of hot-work tool steels during tempering and definition of a kinetic law based on hardness measurementsMaterials Science and Engineering: A, 2004
- Dynamic recrystallization behavior covering a wide austenite grain size range in Nb and Nb–Ti microalloyed steelsMaterials Science and Engineering: A, 2003
- Effect of Microstructure on the Yield Ratio and Low Temperature Toughness of Linepipe Steels.ISIJ International, 2002
- Modelling the kinetics of strain induced precipitation in Nb microalloyed steelsActa Materialia, 2001
- A process model for age hardening of aluminium alloys—I. The modelActa Metallurgica et Materialia, 1990