Flow Property of Alkali-Activated Slag with Modified Precursor
Authors:
- G. M. KimGKG. M. Kim
- Hammad R. KhalidHammad R. Khalid
- S. M. ParkSPS. M. Park
- H. K. LeeHLH. K. Lee
- 1 November 2017
- journal article
- Published by American Concrete Institute in ACI Materials Journal
- Vol. 114 (6) , 867-876
Abstract
No abstract availableKeywords
This publication has 37 references indexed in Scilit:
- Effects of Fly Ash/Slag Ratio and Liquid/Binder Ratio on Strength of Alkali-Activated Fly Ash/Slag MortarsApplied Mechanics and Materials, 2013
- Strength and Drying Shrinkage of Alkali-Activated Slag Paste and MortarAdvances in Civil Engineering, 2012
- Influence of activator on the strength and drying shrinkage of alkali-activated slag mortarConstruction and Building Materials, 2009
- Effects of type and dosage of alkaline activator and temperature on the properties of alkali-activated slag mixturesConstruction and Building Materials, 2007
- Hydration of alkali-activated slag: comparison with ordinary Portland cementAdvances in Cement Research, 2006
- Effect of superplasticizer and shrinkage-reducing admixtures on alkali-activated slag pastes and mortarsCement and Concrete Research, 2005
- Pore solution in alkali-activated slag cement pastes. Relation to the composition and structure of calcium silicate hydrateCement and Concrete Research, 2004
- Setting of alkali-activated slag cement. Influence of activator natureAdvances in Cement Research, 2001
- Alkali-activated fly ash/slag cementsCement and Concrete Research, 2000
- Interference mechanisms in waste stabilization/solidification processesJournal of Hazardous Materials, 1990