History of internal fixation with plates (part 2): new developments after World War II; compressing plates and locked plates
- 30 December 2016
- journal article
- research article
- Published by Springer Nature in International Orthopaedics
- Vol. 41 (7) , 1489-1500
Abstract
The first techniques of operative fracture with plates were developed in the 19th century. In fact, at the beginning these methods consisted of an open reduction of the fracture usually followed by a very unstable fixation. As a consequence, the fracture had to be opened with a real risk of (sometimes lethal) infection, and due to unstable fixation, protection with a cast was often necessary. During the period between World Wars I and II, plates for fracture fixation developed with great variety. It became increasingly recognised that, because a fracture of a long bone normally heals with minimal resorption at the bone ends, this may result in slight shortening and collapse, so a very rigid plate might prevent such collapse. However, as a consequence, delayed healing was observed unless the patient was lucky enough to have the plate break. One way of dealing with this was to use a slotted plate in which the screws could move axially, but the really important advance was recognition of the role of compression. After the first description of compression by Danis with a "coapteur", Bagby and Müller with the AO improved the technique of compression. The classic dynamic compression plates from the 1970s were the key to a very rigid fixation, leading to primary bone healing. Nevertheless, the use of strong plates resulted in delayed union and the osteoporosis, cancellous bone, comminution, and/or pathological bone resulted in some failures due to insufficient stability. Finally, new devices represented by locking plates increased the stability, contributing to the principles of a more biological osteosynthesis while giving enough stability to allow immediate full weight bearing in some patients.Keywords
This publication has 56 references indexed in Scilit:
- A comparative study of Colles’ fractures in patients between fifty and seventy years of age: percutaneous K-wiring versus volar locking platingInternational Orthopaedics, 2011
- The primary stability of angle-stable versus conventional locked intramedullary nailsInternational Orthopaedics, 2011
- Comparison of two different locking plates for two-, three- and four-part proximal humeral fractures—results of an international multicentre studyInternational Orthopaedics, 2011
- Minimally invasive stabilisation of posterior pelvic-ring instabilities with a transiliac locked compression plateInternational Orthopaedics, 2011
- Proximal tibial fractures: early experience using polyaxial locking-plate technologyInternational Orthopaedics, 2010
- Biomechanical in vitro assessment of fixed angle plating using a new concept of locking for the treatment of osteoporotic proximal humerus fracturesInternational Orthopaedics, 2010
- Second generation locked plating of proximal humerus fractures—A prospective multicentre observational studyInternational Orthopaedics, 2010
- Clinical application of locked plating system in children. An orthopaedic viewInternational Orthopaedics, 2010
- Far Cortical Locking Can Reduce Stiffness of Locked Plating Constructs While Retaining Construct StrengthJournal of Bone and Joint Surgery, 2009
- AN IMPACTING BONE PLATE TO ATTAIN CLOSED COAPTATIONAnnals of Surgery, 1951