Comparative Analysis of Response-factor and Finite-volume based Methods for predicting Heat and Moisture Transfer through Porous Building Materials
Authors:
- 1 July 2006
- journal article
- research article
- Published by SAGE Publications in Journal of Building Physics
- Vol. 30 (1) , 7-37
Abstract
Many of the now well-known building energy simulation programs use the response factor method developed in the early 1970s by Stephenson and Mitalas. These are TRNSYS, EnergyPlus, Blast, and DOE-2, to name but a few. Others, such as PowerDomus, ESP-r, and BSim, perform finite-volume or finite-difference calculations to solve the heat and mass transfer through the building envelope. These two different approaches are known to have strengths and weaknesses. The main objective of the present exercise is to compare the prediction of both methods. A two-step procedure is employed here. The first deals with the pure thermal problem, i.e., without moisture calculation. Three different cases of increasing complexity are studied and compared to analytical solutions. The second step focuses on the moisture problem alone by comparing the responses obtained with a two-layer buffer storage model and a finite-volume discretization for moisture transfer. Results show that time step values are determinant even for pure thermal cases where the classical value of 1 h can lead to notable errors. For problems with moisture sorption in the wall, it has been shown that grid refinement is a very decisive parameter, while the time step has to be set, to unusually small values, to achieve a good response.Keywords
This publication has 4 references indexed in Scilit:
- A new mathematical method to solve highly coupled equations of heat and mass transfer in porous mediaInternational Journal of Heat and Mass Transfer, 2002
- International Energy Agency Building Energy Simulation Test and Diagnostic Method for Heating, Ventilating, and Air-Conditioning Equipment Models (HVAC BESTEST); Volume 1: Cases E100-E2002002
- Effective penetration depth and effective resistance in moisture transferBuilding and Environment, 1992
- Validation of building energy analysis simulation programs at the solar energy research instituteEnergy and Buildings, 1988