Short‐Crack Mechanical Properties and Failure Mechanisms of Si 3 N 4 ‐Matrix/SiC‐Fiber Composites
Authors:
- 1 July 1994
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 77 (7) , 1889-1896
Abstract
SiC‐fiber‐reinforced Si 3 N 4 composites were fabricated by hot pressing. The indentation‐strength technique was applied to study the mechanical properties of these composites. This enabled the investigation of short‐crack behavior of continuous‐fiber ceramic composites (CFCCs). The flaw tolerance of composite ultimate strength, matrix‐cracking stress, and work‐of‐fracture were investigated. Scanning electron microscopy was used to examine crack–fiber interactions. The ultimate strength was found to be independent of indentation load at a fiber volume fraction f = 0.29, while at f = 0.14 it exhibited a transition from flawsensitive to flaw‐independent. The work‐of‐fracture was found to be independent of indentation load at both fiber volume fractions. The matrix‐cracking stress was found to correspond to the first load‐drop on the load–displacement curve. It decreased with increasing flaw size and therefore is the steady‐state matrix‐cracking stress. A failure mechanism transition from catastrophic failure to non‐catastrophic failure, coupled with the transition from flawsensitive to flaw‐tolerant behavior, was observed by varying the preexisting flaw size and the fiber volume fraction. These transitions were explained by analyzing the relations between ultimate strength, matrix‐cracking stress, fiber volume fraction, and preexisting flaw size of the composite materials. Experimental results were compared with predictions from available models.Keywords
This publication has 27 references indexed in Scilit:
- Effects of Exposure Time and Strain Rate on the Elevated-Temperature Tensile Strength of SiC Monofilaments1992
- Fiber–Matrix Interfacial Characteristics in a Fiber‐Reinforced Ceramic‐Matrix CompositeJournal of the American Ceramic Society, 1989
- Effect of Interface Mechanical Properties on Pullout in a SiC‐Fiber‐Reinforced Lithium Aluminum Silicate Glass‐CeramicJournal of the American Ceramic Society, 1989
- Silicon Carbide Monofilament‐Reinforced Silicon Nitride or Silicon Carbide Matrix CompositesJournal of the American Ceramic Society, 1989
- Microstructure/Property Relationships for SiC Filament-Reinforced RBSN1986
- Failure Mechanisms in Ceramic‐Fiber/Ceramic‐Matrix CompositesJournal of the American Ceramic Society, 1985
- SiC Monofilament-Reinforced Si3N4 Matrix Composites1985
- The Effect of Ceramic Fiber Coatings on the Room Temperature Mechanical Behavior of Ceramic-Fiber Composites1984
- High-strength silicon carbide fibre-reinforced glass-matrix compositesJournal of Materials Science, 1980
- Carbon fibre composites with ceramic and glass matricesJournal of Materials Science, 1972