Control of the plume induced during high-power fiber laser welding with a transverse arc
Authors:
- 6 March 2015
- journal article
- Published by IOP Publishing in Laser Physics Letters
- Vol. 12 (4)
Abstract
In this letter, the addition of the transverse arc into high-power fiber welding is proposed. The effects of the transverse arc on the laser-induced plume, the morphology of the weld, and the stability of the welding process are investigated. The experimental results indicate that, by introducing the transverse arc, the slender plume disappears, the temperature of the plasma plume increases then decreases with the rise in height, the weld width is reduced by around 42%, and the weld depth and the melting area are enhanced by about 28 and 12%, respectively. Moreover, the stability of the welding process is improved remarkably. As concluded from further analysis, the Mie scattering of the incident laser, induced by the particles in the plume, is responsible for the adverse effects induced by the plume. With the addition of the transverse arc, the particles in the plume are gasified and, thus, do not impact the energy transmission of the fiber laser. Consequently, the adverse effects induced by the plume can be significantly suppressed while the laser energy utilization efficiency and the stability of the welding process are improved.Keywords
This publication has 12 references indexed in Scilit:
- Effect of Laser-Induced Plume on Welding Process During High Power Fiber Laser WeldingChinese Journal of Lasers, 2014
- Linearly polarized ytterbium-doped fiber laser in a pedestal design with aluminosilicate inner claddingLaser Physics Letters, 2011
- Plume attenuation of laser radiation during high power fiber laser weldingLaser Physics Letters, 2011
- Problems and issues in laser-arc hybrid weldingInternational Materials Reviews, 2009
- Effect of weakly ionised plasma on penetration of stainless steel weld produced with ultra high power density fibre laserScience and Technology of Welding and Joining, 2008
- Characterisation of plasma induced during high power fibre laser welding of stainless steelScience and Technology of Welding and Joining, 2008
- Progress on Laser-Arc Hybrid WeldingChinese Journal of Lasers, 2008
- Elucidation of high-power fibre laser welding phenomena of stainless steel and effect of factors on weld geometryJournal of Physics D: Applied Physics, 2007
- Spectroscopic characterization of laser-induced plasma created during welding with a pulsed Nd:YAG laserJournal of Applied Physics, 1997
- An analytical thermodynamic model of laser weldingJournal of Physics D: Applied Physics, 1997