Experimental verification and theoretical analysis of the relationships between hardness, elastic modulus, and the work of indentation
- 9 June 2008
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 92 (23) , 231906
Abstract
The relationship between hardness , reduced modulus , unloading work , and total work of indentation is examined in detail experimentally and theoretically. Experimental study verifies the approximate linear relationship. Theoretical analysis confirms it. Furthermore, the solutions to the conical indentation in elastic-perfectly plastic solid, including elastic work , , , and are obtained using Johnson’s expanding cavity model and Lamé solution. Consequently, it is found that the should be distinguished from , rather than their equivalence as suggested in ISO14577, and depends mainly on the conical angle, which are also verified with numerical simulations.
Keywords
This publication has 10 references indexed in Scilit:
- Comments on “Comment on the determination of mechanical properties from the energy dissipated during indentation” by J. Malzbender [J. Mater. Res. 20, 1090 (2005)]Journal of Materials Research, 2006
- Evaluation of the effectiveness of representative methods for determining Young's modulus and hardness from instrumented indentation dataJournal of Materials Research, 2006
- Reply to the comments on “Comment on the determination of mechanical properties from the energy dissipated during indentation” by J. Malzbender [J. Mater. Res. 20, 1090 (2005)]Journal of Materials Research, 2006
- Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodologyJournal of Materials Research, 2004
- Analysis of nano-indentation measurements on carbon nitride filmsSurface and Coatings Technology, 2003
- Scaling relationships for indentation measurementsPhilosophical Magazine A, 2002
- Relationships between hardness, elastic modulus, and the work of indentationApplied Physics Letters, 1998
- A study of turbulent combustion and its modeling using a diffusion reaction equation modelInternational Journal of Engineering Science, 1996
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- Contact Mechanics1985