Abstract
Heteroepitaxy of β-Ga2O3 on polycrystalline diamond provides a critical thermal management solution for high-power devices but is hindered by the disordered crystallographic orientations of the substrate. In this research, a graphene interlayer is used to mitigate lattice mismatch and interfacial thermal stress, enhancing film quality. Results reveal that the thin-film growth follows the Stranski–Krastanov mode and the produced β-Ga2O3 films exhibit preferential growth along the ([[EQUATION]]) plane, with an average surface roughness of 3.65 nm and a full width at half maximum as narrow as 0.19°, confirming the successful epitaxy of high-crystallinity, phase-pure β-Ga2O3 thin films. Infrared thermography confirms the superior heat dissipation capability of the diamond substrate, yielding an external effective thermal conductivity of 95.8 W/m·K. A fabricated β-Ga2O3-based photodetector exhibits a dark current of 1.2 nA, photo-to-dark current ratio of 105, and responsivity of 218 A/W. This study overcomes the fundamental challenge of the epitaxy of Ga2O3 on diamond, advancing next-generation high-power and optoelectronic semiconductor technologies.

This publication has 32 references indexed in Scilit: