The microstructure and mechanical properties of (TiAlSiY)N nanostructured coatings
- 1 September 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 01FNC13-1
Abstract
(TiAlSiY)N nanostructured coatings fabricated via the vacuum-arc evaporation method were investigated using a complex of complementary techniques. A bias potential was varied from -200 V (series 1) to -500 V (series 2) to analyze the influence of this parameter on the microstructure, phase composition and mechanical properties of nitride coatings. High potential (-500 V) led to selective sputtering of the target material, small size of crystallites of about 10 nm, and their preferred orientation with [110] axis. It caused a low hardness (H = 6.95 GPa) and a tendency to intense wear during scratch test and tribological tests. At a bias potential of about -200 V, crystallites of the stoichiometric composition with an average size of 140 nm and preferred orientation with [111] axis were formed. In this case, (TiAlSiY)N coatings showed superhard state (H = 49.5 GPa), and were characterized by high resistance to abrasion and low wear during tribological tests.Keywords
This publication has 27 references indexed in Scilit:
- Surface characteristics and wear depth profile of the TiN, TiAlN and AlCrN coated stainless steel in dry sliding wear conditionSurfaces and Interfaces, 2017
- The effects of Cr and Si additions and deposition conditions on the structure and properties of the (Zr-Ti-Nb)N coatingsCeramics International, 2017
- Structure and physicomechanical properties of NbN-based protective nanocomposite coatings: A reviewProtection of Metals and Physical Chemistry of Surfaces, 2016
- Effect of 10% Si addition on cathodic arc evaporated TiAlSiN coatingsTransactions of Nonferrous Metals Society of China, 2016
- Structure engineering in vacuum-arc-deposited coatings of the MoN–CrN systemTechnical Physics Letters, 2016
- A comparative study for surface texture evaluation of TiAlN coatingsMaterials Today: Proceedings, 2016
- Nano‐Microcomposite and Combined Coatings on Ti‐Si‐N/WC‐Co‐Cr/Steel and Ti‐Si‐N/(Cr 3 C 2 ) 75 ‐(NiCr) 25 Base: Their Structure and Properties2010
- Temperature dependence of structure and mechanical properties of Ti–Si–N coatingsSurface and Coatings Technology, 2004
- Microstructure, mechanical properties and cutting performance of superhard (Ti,Si,Al)N nanocomposite films grown by d.c. reactive magnetron sputteringSurface and Coatings Technology, 2004
- A review of mixing processes in Ta/Fe and Mo/Fe systems treated by high current electron beamsNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1998