Abstract
A 700-MHz to 1.6-GHz RF power digital-to-analog converter with programmable integrated harmonic cancellation and mixed-signal filtering is presented. Harmonic cancellation is implemented by splitting the power amplifier (PA) into segments, driving different segments of the PA with phase-shifted versions of the local oscillator (LO) signals, and summing at the output. Mixed-signal filtering is realized in a similar fashion but with segments driven with delayed versions of the input data. The phase shift and data delays are reconfigurable and implemented to operate across a wide frequency range. To boost efficiency, 25% duty cycle LO signals are used. A technique to correct for IQ constellation distortion induced by these 25% duty cycle LO signals is introduced and verified in measurements. The transmitter (TX) operates at a maximum sample rate of 500 MSa/s and achieves an output power of 25.6 dBm for an output load of 100 Ω when harmonic cancellation is enabled. The TX demonstrates 24-42 dB of 3rd harmonic cancellation for continuous wave signals across a 700-MHz to 2-GHz frequency range, achieving an HD3 as low as -57 dB. The TX achieves an HD3 reduction of 33 dB and an 18-dB notch at 40-MHz offset with 20-MHz long-term evolution data.
Funding Information
  • DARPA RF-FPGA in collaboration with Nokia and Boeing

This publication has 8 references indexed in Scilit: