Modeling of Air Permeability of Knitted Fabric Using the Computational Fluid Dynamics
Authors:
Open Access
- 1 December 2018
- journal article
- research article
- Published by Walter de Gruyter GmbH in Autex Research Journal
- Vol. 18 (4) , 364-376
Abstract
This article concerns the widespread matter of biophysical comfort. In this work, 10 double-layer knitted fabrics with potential application in multilayer garments addressed to a specific group of users, such as newborns, were investigated. The materials were constructed with the following raw materials: cotton, polypropylene, polyester, polyamide, bamboo, and viscose. The textiles with a comparable geometrical structure and different composition were tested for their air permeability. In the experimental part, the materials were tested in specific constant ambient conditions using an air permeability tester. In the simulation part, 3D models of actual textiles were designed and air permeability based on the performed simulations using finite volume method was calculated. Both measurements and simulations yielded comparable results and showed that the air permeability of the knitted fabric strongly depends on the thickness and geometrical parameters of yarn.Keywords
This publication has 8 references indexed in Scilit:
- Study of Multilayer Clothing Thermal Insulation Using Thermography and the Finite Volume MethodFibres & Textiles in Eastern Europe, 2016
- Estimation of the Inter-Yarn Channel Inlet Diameter in Textile Materials Using Structured Light 3D Micro-ScanningFibres & Textiles in Eastern Europe, 2016
- The study of knitted fabric thermal insulation using thermography and finite volume methodTextile Research Journal, 2016
- Simulations of Heat Transport Phenomena in a Three-Dimensional Model of Knitted FabricAutex Research Journal, 2016
- Detection of Fabric Structure Irregularities Using Air Permeability MeasurementsJournal of Engineered Fibers and Fabrics, 2014
- Application of Microtomography in Textile MetrologyTekstilec, 2014
- Determination of the pore size of woven structures through image analysisOpen Engineering, 2011
- Prediction of one-layer woven fabrics air permeability using porosity parametersTextile Research Journal, 2011