Investigation on Joining Mechanism of SiC Particle Reinforced Aluminum Matrix Composite (Al/SiCp-MMC) by Resistance Spot Welding
Authors:
- 1 December 2011
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 704-705, 1399-1405
Abstract
The present study had investigated the joining performance of SiC particle reinforced aluminum metal matrix composite (Al/SiCp-MMC) having 1.0mm thickness by resistance spot welding processes. The welded joints were subjected to tensile-shearing tests in order to determine the strength of the welded zone. In addition both scanning electron microscopy (SEM) and optical microscopy (OM) were conducted to investigate the micro structural and micro hardness’s changes of the welded joints. The results reveal that: the maximum tensile-shear strength value of welded joint was obtained in these optimum welding parameters as in 17.5kA welding current for 60 periods welding. The electrode pressure was 3.5kN. It was favorable to select relatively high welding current and short welding time for improving mechanical properties of spot welded SiCp/LY12 composite joint. In this base, the welding mechanism of resistance spot welding SiCp/LY12 composite has also been discussed in detail.Keywords
This publication has 11 references indexed in Scilit:
- Investigation on reactive diffusion bonding of SiCp/6063 MMC by using mixed powders as interlayersJournal of Materials Processing Technology, 2007
- Friction stir welding of SiC particulate reinforced AA2124 aluminium alloy matrix compositeMaterials & Design (1980-2015), 2007
- Effect of process parameters on the physical characteristics of spot weld jointsMaterials & Design (1980-2015), 2007
- The influence of welding parameters on the joint strength of resistance spot-welded titanium sheetsMaterials & Design (1980-2015), 2007
- Investigation on diffusion bonding characteristics of aluminum metal matrix composites (Al/SiCp) with pure aluminum for different heat treatmentsJournal of Materials Processing Technology, 2006
- The effect of nucleus size on mechanical properties in electrical resistance spot welding of sheets used in automotive industryMaterials & Design (1980-2015), 2006
- Dissimilar welds between unreinforced AA6082 and AA6092/SiC/25p composite by pulsed-MIG arc welding using unreinforced filler alloys (Al–5Mg and Al–5Si)Journal of Materials Processing Technology, 2003
- Friction Stir Welding of Al2O3 Particulate 6061 Al Alloy CompositeMaterials Science Forum, 2003
- Influence of interface reactions on fracture mechanisms in TIG arc-welded aluminium matrix compositesComposites Science and Technology, 2000
- Fusion Welding of SiC Particulate-reinforced Aluminum 392 Metal Matrix CompositeJournal of Materials Science Letters, 1998