Study of Thermal Compression Constitutive Relation for 5182-Sc-Zr Alloy Based on Arrhenius-Type and ANN Model
Open Access
Abstract
Hot compression experiments were performed on alloy 5182 with small additions of Sc and Zr. The 5182 alloy containing Sc and Zr is critical for expanding the 5182 alloy’s range of applications, and a thorough understanding of its thermal processing behavior is of great importance to avoid processing defects. Alloy microstructure, including grain structures and Al3(ScxZr1−x) dispersoids were analyzed by EBSD and TEM. Stable flow stresses were observed below a strain rate of 1 s−1 for the Sc-Zr containing alloy. The results of constitutive models, with and without strain−compensation, and artificial neural network (ANN) were used to compare to the experimental results. The Al3(ScxZr1−x) dispersoid data was introduced into the ANN model as a nonlinear influence factor. Addition of the Al3(ScxZr1−x) dispersoid information as input data improved the accuracy and practicality of the artificial neural network in predicting the deformation behavior of the alloy. The squared correlation coefficients of ANN prediction data reached 0.99.Keywords
Funding Information
- Ministry of Education and the State Administration of Foreign Experts Affairs of China (B16007)
- National Natural Science Foundation of China (51571046, 51421001)
This publication has 60 references indexed in Scilit:
- Flow curve prediction of Al–Mg alloys under warm forming conditions at various strain rates by ANNApplied Soft Computing, 2011
- Ambient- and high-temperature mechanical properties of isochronally aged Al–0.06Sc, Al–0.06Zr and Al–0.06Sc–0.06Zr (at.%) alloysActa Materialia, 2011
- Development of constitutive relationship model of Ti600 alloy using artificial neural networkComputational Materials Science, 2010
- The effect of erbium on the microstructure and mechanical properties of Al–Mg–Mn–Zr alloyMaterials Science and Engineering: A, 2009
- Analysis of adiabatic heating and its influence on the Garofalo equation parameters of a high nitrogen steelMaterials Science and Engineering: A, 2009
- Effects of Al3Sc particle size and precipitate-free zones on fatigue behavior and dislocation structure of an aged Al–Mg–Sc alloyInternational Journal of Fatigue, 2008
- ANN constitutive model for high strain-rate deformation of Al 7075-T6Journal of Materials Processing Technology, 2007
- The effect of Mg precipitation on the mechanical properties of 5xxx aluminum alloysMaterials Science and Engineering: A, 2005
- FE-based analysis for the prediction of inner microstructure in metal formingModelling and Simulation in Materials Science and Engineering, 2002
- Instability map for hot working of 6061 Al-10 vol% metal matrix compositeJournal of Physics D: Applied Physics, 1998