Benchmarking 2D hydraulic models for urban flooding
Top Cited Papers
- 1 February 2008
- journal article
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Water Management
- Vol. 161 (1) , 13-30
Abstract
This paper describes benchmark testing of six two-dimensional (2D) hydraulic models (DIVAST, DIVASTTVD, TUFLOW, JFLOW, TRENT and LISFLOOD-FP) in terms of their ability to simulate surface flows in a densely urbanised area. The models are applied to a 1·0 km × 0·4 km urban catchment within the city of Glasgow, Scotland, UK, and are used to simulate a flood event that occurred at this site on 30 July 2002. An identical numerical grid describing the underlying topography is constructed for each model, using a combination of airborne laser altimetry (LiDAR) fused with digital map data, and used to run a benchmark simulation. Two numerical experiments were then conducted to test the response of each model to topographic error and uncertainty over friction parameterisation. While all the models tested produce plausible results, subtle differences between particular groups of codes give considerable insight into both the practice and science of urban hydraulic modelling. In particular, the results show that the terrain data available from modern LiDAR systems are sufficiently accurate and resolved for simulating urban flows, but such data need to be fused with digital map data of building topology and land use to gain maximum benefit from the information contained therein. When such terrain data are available, uncertainty in friction parameters becomes a more dominant factor than topographic error for typical problems. The simulations also show that flows in urban environments are characterised by numerous transitions to supercritical flow and numerical shocks. However, the effects of these are localised and they do not appear to affect overall wave propagation. In contrast, inertia terms are shown to be important in this particular case, but the specific characteristics of the test site may mean that this does not hold more generally.Keywords
This publication has 33 references indexed in Scilit:
- Using remotely sensed data to support flood modellingProceedings of the Institution of Civil Engineers - Water Management, 2006
- Potential and limitations of 1D modelling of urban floodingJournal of Hydrology, 2004
- Estimation of flood inundation probabilities as conditioned on event inundation mapsWater Resources Research, 2003
- Numerical simulation of overbank processes in topographically complex floodplain environmentsHydrological Processes, 2002
- Evaluation of 1D and 2D numerical models for predicting river flood inundationJournal of Hydrology, 2002
- Calibration of a two‐dimensional finite element flood flow model using satellite radar imageryWater Resources Research, 2000
- A simple raster-based model for flood inundation simulationJournal of Hydrology, 2000
- INTERNAL AND EXTERNAL VALIDATION OF A TWO-DIMENSIONAL FINITE ELEMENT CODE FOR RIVER FLOOD SIMULATIONS.Proceedings of the Institution of Civil Engineers - Water, Maritime and Energy, 1998
- Terrain analysis for urban stormwater modellingHydrological Processes, 1991
- Large‐scale floodplain modellingEarth Surface Processes and Landforms, 1990