Cryogenic expanders with work production have a predominant influence on refrigerator/liquefier reliability and efficiency. This paper presents a new cryogenic expander technology for a 10 L/h helium liquefier: the scroll expander. In order to optimize the spiral geometry, a numerical model was worked out to simulate the thermodynamic behavior of the scroll expander. This numerical tool highlights the strong influence on the isentropic efficiency of the clearances between the fixed and the orbiting spirals. Rigid driving mechanism with high rotation accuracy was needed to obtain clearances ranging from 10 to 20 μm. A three-crankshaft type mechanism was manufactured. A system of one thermal jack per shaft, based on controlled thermal expansion of an aluminum alloy tube and an abradable coating deposited on the fixed spiral were developed to overcome this constraint. This expander has been tested on a Brayton cycle refrigerator and reached an isentropic efficiency of 50 to 60% for inlet gas conditions of 35 K and 0.7 MPa. Comparison of measurements with numerical results shows the effect on the isentropic efficiency of the ultimate expansion pressure between the chamber just before opening and the cycle low pressure. Considering the good experimental results and the peculiar technology of the scroll expander, this prototype could be also used as a wet expander in place of a Joule-Thomson valve.