Effects of the compositional ratio distribution with sulfurization temperatures in the absorber layer on the defect and surface electrical characteristics of Cu2ZnSnS4solar cells
- 21 April 2015
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 23 (12) , 1771-1784
Abstract
Although Cu2ZnSnS4(CZTS) has attracted attention as an alternative absorber material to replace CuInGaSe2(CIGS) in solar cells, the current level of understanding of its characteristic loss mechanisms is not sufficient for achieving high power conversion efficiency. In this study, which aimed to minimize the characteristic losses across the devices, we examined the relations between the compositional ratio distribution in the absorber layer, subsequent defect formation, and surface electrical characteristics. A high‐temperature sulfurization process was used to improve the crystallinity of the absorber layer, which increased the uniformity of the compositional ratio distribution and consequently suppressed the formation of a ZnS secondary phase on the CZTS/MoS2interface. Because defects and defect clusters generated in the absorber layer are shallower when the compositional ratio distribution is uniform, the electron‐hole recombination loss is reduced. These characteristics were confirmed by measuring the defect energy level using admittance spectroscopy and by analyzing the surface potential and current characteristics. These measurements revealed that improving the compositional ratio distribution suppresses the formation of deep‐level defects and reduces the rate of carrier recombination. In addition, improving the compositional ratio distribution substantially contributes to improving the series resistance and short circuit current density characteristics. Copyright © 2015 John Wiley & Sons, Ltd.Keywords
Funding Information
- Korea Government Ministry of Trade, Industry and Energy (20123010010130)
This publication has 42 references indexed in Scilit:
- Co-evaporated Cu2ZnSnSe4 films and devicesSolar Energy Materials and Solar Cells, 2012
- Kesterite Thin‐Film Solar Cells: Advances in Materials Modelling of Cu2ZnSnS4Advanced Energy Materials, 2012
- Investigating the Role of Grain Boundaries in CZTS and CZTSSe Thin Film Solar Cells with Scanning Probe MicroscopyAdvanced Materials, 2012
- Effect of Cu/(Zn+Sn) ratio on the properties of co-evaporated Cu2ZnSnSe4 thin filmsSolar Energy Materials and Solar Cells, 2010
- Preparation of Cu2ZnSnS4 thin films by sulfurizing electroplated precursorsSolar Energy Materials and Solar Cells, 2009
- Materials Availability Expands the Opportunity for Large-Scale Photovoltaics DeploymentEnvironmental Science & Technology, 2009
- Current routes in polycrystalline CuInSe2 and Cu(In,Ga)Se2 filmsSolar Energy Materials and Solar Cells, 2007
- Powering the planet: Chemical challenges in solar energy utilizationProceedings of the National Academy of Sciences, 2006
- Influence of deep traps on the measurement of free-carrier distributions in semiconductors by junction capacitance techniquesJournal of Applied Physics, 1974
- Statistics of the Recombinations of Holes and ElectronsPhysical Review B, 1952