Interconnect Network Analysis of Many-Core Chips
Authors:
- 25 July 2011
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 58 (9) , 2831-2837
Abstract
This paper presents the first intercore interconnect technology optimization and wiring demand calculation for mesh, concentrated mesh, flattened butterfly, and concentrated flattened butterfly network-on-chip topologies. Global wire dimensions are optimized to achieve maximum bandwidth and minimum delay. The core-to-core channel width is then determined by taking into account the available wiring area and area occupied by the router within each core. It is shown that the router area limits the channel width for all topologies. In mesh and concentrated mesh topologies, a smaller channel width results in underutilization of the available wiring area; less than 10% of the area available in two orthogonal wiring levels if the router area is constrained to 20% of the core area. For flattened butterfly and concentrated flattened butterfly topologies, the required wiring areas can be as high as 80% of two orthogonal wiring levels for the same routing area constraint. However, flattened butterfly topology does not scale for a larger number of cores due to the rapid increase in the number of ports and, consequently, router area.Keywords
This publication has 13 references indexed in Scilit:
- Optimal Global Interconnects for Networks-on-Chip in Many-Core ArchitecturesIEEE Electron Device Letters, 2010
- ORION 2.0: A fast and accurate NoC power and area model for early-stage design space exploration2009
- Modeling of the performance of carbon nanotube bundle, cu/low-k and optical on-chip global interconnects2007
- The Delay, Energy, and Bandwidth Comparisons between Copper, Carbon Nanotube, and Optical Interconnects for Local and Global Wiring Application2007
- Comprehensive study of the resistivity of copper wires with lateral dimensions of 100 nm and smallerJournal of Applied Physics, 2004
- Comparisons of Conventional, 3-D, Optical, and RF Interconnects for On-Chip Clock DistributionIEEE Transactions on Electron Devices, 2004
- Compact distributed RLC interconnect models. IV. Unified models for time delay, crosstalk, and repeater insertionIEEE Transactions on Electron Devices, 2003
- Optimal global interconnects for GSIIEEE Transactions on Electron Devices, 2003
- A delay model and speculative architecture for pipelined routers2002
- The mean free path of electrons in metalsAdvances in Physics, 2001