Effect of the particle size and particle agglomeration on composite membrane performance
- 4 August 2010
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 118 (4) , 2417-2424
Abstract
One of the most used methods for studying the rigidification of polymer matrices in composite membranes is differential scanning calorimetry. Glass‐transition temperatures give information about filler–polymer interaction and the rigidity of the polymer matrix. In this study, optical microscopy, mechanical property testing, and X‐ray diffraction, instead of differential scanning calorimetry, were used to study both poly(ether imide) (PEI) matrix rigidification and activated carbon–PEI interfacial adhesion. Then, the permselective properties of the mixed matrix membranes were interpreted. The change in rigidity in these composite membranes was in agreement with the decrease in the flexibility of the composite materials as the filler content increased. This fact was confirmed by the tension and elongation data and X‐ray diffraction (DRX) measurements. However, the Young's modulus value decreased as the carbon content increased. There was an increase in all of the gas permeability coefficients measured in the composites compared with that of PEI. As the particle size grew, a low particle surface area and a poor interfacial adhesion were observed. The carbon agglomerates acted as sites of stress concentration within the polymeric matrix. This decreased the intercatenary distances and limited the movement of polymer chains, which resulted in a more rigid matrix. The higher selectivity of the H2/CH4, H2/CO2 and O2/N2 systems observed in the composite membranes revealed that there were both a preferential sorption of certain gases in the carbon surface or carbon–polymer interface and a molecular size exclusion, which were responsible for that increment, despite the poor interfacial adhesion. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010Keywords
This publication has 30 references indexed in Scilit:
- Cross-Linkable Polyimide Membrane for Natural Gas Purification and Carbon Dioxide Plasticization ReductionMacromolecules, 2007
- Transport properties of cross-linked polyimide membranes induced by different generations of diaminobutane (DAB) dendrimersJournal of Membrane Science, 2004
- Carbon Dioxide-Induced Plasticization of Polyimide Membranes: Pseudo-Equilibrium Relationships of Diffusion, Sorption, and SwellingMacromolecules, 2003
- Solid-State Covalent Cross-Linking of Polyimide Membranes for Carbon Dioxide Plasticization ReductionMacromolecules, 2003
- Mixed matrix membrane materials with glassy polymers. Part 1Polymer Engineering & Science, 2002
- Polyimide hollow fiber gas separation membranes: preparation and the suppression of plasticization in propane/propylene environmentsJournal of Membrane Science, 2001
- Gas permeability and permselectivity of photochemically crosslinked copolyimidesJournal of Applied Polymer Science, 1999
- Plasticization-resistant glassy polyimide membranes for CO2/CO4 separationsSeparation and Purification Technology, 1998
- Effect of photocrosslinking on permeability and permselectivity of gases through benzophenone- containing polyimideJournal of Membrane Science, 1994
- The diffusion time lag in polymer membranes containing adsorptive fillersJournal of Polymer Science: Polymer Symposia, 1973