Real-Time Method of Obtaining Rock Mechanics Parameters Based on the Core Drilling Test
Authors:
- 1 March 2019
- journal article
- research article
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 43 (2) , 480-494
Abstract
Accurately obtaining the mechanics parameters of the surrounding rock at an engineering site in real time is a key component of the construction process that is required to determine and adjust the support scheme in a timely manner and thus ensure construction safety. Currently, studies of the real-time measurement methods of the cohesion, c, and internal friction angle, φ, of the surrounding rock at a site are relatively limited, and the digital core drilling test technique provides a new approach for obtaining accurate rock parameters (c and φ) in real time at an underground engineering site. Based on the principle of upper bound analysis, in this article, a relationship model between the core drilling parameters and rock mechanics parameters (CDP-RMP) is established, and the rock core drilling cutting strength is obtained. An inversion method is proposed to obtain the rock parameters (c and φ). Additionally, by using the multifunctional rock digital drilling test system developed, digital core drilling tests are conducted on rock specimens with different lithologies. The results show that the inversion values for the rock parameters c and φ are essentially consistent with the results of the triaxial test, which verifies the accuracy of the CDP-RMP model and that of the inversion method for the rock parameters c and φ. A real-time method for obtaining rock mechanics parameters based on the digital core drilling test is further established. This method can conveniently obtain accurate mechanical parameters for the surrounding rock onsite in real time and provides a foundation for the timely optimization of the support scheme and the informatization construction of underground engineering.Keywords
This publication has 31 references indexed in Scilit:
- Influence of the fault zone in shallow tunneling: A case study of Izmir Metro TunnelTunnelling and Underground Space Technology, 2013
- Prediction of penetration rate of rotary-percussive drilling using artificial neural networks – a case study / Prognozowanie postępu wiercenia przy użyciu wiertła udarowo-obrotowego przy wykorzystaniu sztucznych sieci neuronowych – studium przypadkuArchives of Mining Sciences, 2012
- Displacement-based numerical back analysis for estimation of rock mass parameters in Siah Bisheh powerhouse cavern using continuum and discontinuum approachTunnelling and Underground Space Technology, 2012
- Numerical modelling of the effects of weak immediate roof lithology on coal mine roadway stabilityInternational Journal of Coal Geology, 2012
- An Estimation of Rock Strength Using a Drilling Performance Model: A Case Study in Blacktip Field, AustraliaRock Mechanics and Rock Engineering, 2011
- An experimental investigation into the drilling and physico-mechanical properties of a rock-like brittle materialJournal of Petroleum Science and Engineering, 2011
- Predicting Uniaxial Compressive Strength by Point Load Test: Significance of Cone PenetrationRock Mechanics and Rock Engineering, 2006
- A new displacement back analysis to identify mechanical geo‐material parameters based on hybrid intelligent methodologyInternational Journal for Numerical and Analytical Methods in Geomechanics, 2004
- Back analysis for tunnel engineering as a modern observational methodTunnelling and Underground Space Technology, 2003
- The mechanics of rock cuttingInternational Journal of Rock Mechanics and Mining Sciences, 1972