Semi-Destructive and Non-Destructive Tests of Timber Structure of Various Moisture Contents
Open Access
Abstract
The condition of heritage and historic timber constructions depends on how they are exploited. Numerous environmental factors degrade the physical and mechanical properties of timber and hence, affect the load-bearing capacity of constructions. As a result, frequent evaluations of their technical condition become necessary. Currently, modern technologies allow for extensive diagnostics of timber constructions using non-destructive and semi-destructive methods; yet, in contrast to classical laboratory tests, there is insufficient knowledge of the impact of individual factors on the results of such studies. This article presents an assessment of the influence of the moisture content of timber elements on the results of ultrasonic stress wave, sclerometric, and resistance drilling tests. Additionally, computed tomography scans were performed on selected samples to demonstrate the destruction mechanism occurring during the semi-destructive tests. The research involved three types of wood: pine, spruce, and fir of different moisture contents. The results reveal a strong relation between the moisture of timber and all the tests conducted in terms of both hygroscopic and capillary moisture.Keywords
This publication has 29 references indexed in Scilit:
- Mechanical properties of wood examined by semi-destructive devicesMaterials and Structures, 2013
- Wrocław University’s Leopoldinum Auditorium – Tests of Its Ceiling and a Conservation and Strengthening ConceptAdvanced Materials Research, 2010
- Visual strength-grading and NDT of timber in traditional structuresJournal of Building Appraisal, 2008
- Chestnut wood in compression perpendicular to the grain: Non-destructive correlations for test results in new and old woodConstruction and Building Materials, 2007
- Neutron imaging versus standard X-ray densitometry as method to measure tree-ring wood densityTrees, 2007
- In situ assessment of structural timber elements of a historic building by infrared thermography and ultrasonic velocityInfrared Physics & Technology, 2007
- A technical note on the relationship between ultrasonic velocity and moisture content of Brazilian hardwood (Goupia glabra)Building and Environment, 2005
- Mechanical characterisation of wooden structures by means of an in situ penetration testConstruction and Building Materials, 1998
- Moisture content and temperature effect on ultrasound timber gradingWood Science and Technology, 1993
- A penetration test to evaluate wood decay and its application to the Loggia monumentMaterials and Structures, 1993