Performance Evaluation of Hot Mix Asphalt (HMA) Containing Polyethylene Terephthalate (PET) Using Wet and Dry Mixing Techniques
Open Access
Abstract
This study evaluates the performance of Polyethylene Terephthalate (PET)-modified hot mix asphalt. Aggregate, bitumen of grade 60/70 and crushed plastic bottle waste were utilized in this study. Polymer Modified Bitumen (PMB) was prepared using a high shear laboratory type mixer rotating at a speed of 1100 rpm with varying PET content of 2%, 4%, 6%, 8% and 10%, respectively. Overall, the results of preliminary tests suggested that bitumen hardened with the addition of PET. Following optimum bitumen content determination, various modified and controlled HMA samples were prepared as per wet and dry mixing techniques. This research presents an innovative technique to compare the performance of HMA prepared via dry and wet mixing techniques. Performance evaluation tests, which include the Moisture Susceptibility Test (ALDOT-361-88), Indirect Tensile Fatigue Test (ITFT-EN12697-24) and Marshall Stability and Flow Tests (AASHTO T245-90), were conducted on controlled and modified HMA samples. The dry mixing technique yielded better results in terms of resistance against fatigue cracking, stability and flow; however, the wet mixing technique yielded better results in terms of resistance against moisture damage. The addition of PET at more than 4% resulted in a decreased trend for fatigue, stability and flow due to the stiffer nature of PET. However, for the moisture susceptibility test optimum PET content was noted to be 6%. Polyethylene Terephthalate-modified HMA is found to be the economical solution for high volume road construction and maintenance, besides having other significant advantages such as increased sustainability and waste reduction.Keywords
This publication has 22 references indexed in Scilit:
- Laboratory investigation of the performances of cement and fly ash modified asphalt concrete mixturesInternational Journal of Pavement Research and Technology, 2016
- Recycling of polyethylene terephthalate (PET) plastic bottle wastes in bituminous asphaltic concreteCogent Engineering, 2016
- Sustainability Assessment of Bitumen with Polyethylene as PolymerIOSR Journal of Mechanical and Civil Engineering, 2013
- Green Pavement using Recycled Polyethylene Terephthalate (PET) as Partial Fine Aggregate Replacement in Modified AsphaltProcedia Engineering, 2013
- Performance evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphaltConstruction and Building Materials, 2012
- A review of using waste and virgin polymer in pavementConstruction and Building Materials, 2012
- Using waste plastic bottles as additive for stone mastic asphaltMaterials & Design (1980-2015), 2011
- Effect of polyethylene on life of flexible pavementsConstruction and Building Materials, 2009
- Development of a recycled polymer modified binder for use in stone mastic asphaltResources, Conservation and Recycling, 2008
- Assessing Potential for Warm-Mix Asphalt Technology AdoptionTransportation Research Record: Journal of the Transportation Research Board, 2007