A Scaling Parameter and Function for the Accurate Correlation of Viscosity With Temperature and Pressure Across Eight Orders of Magnitude of Viscosity
Authors:
- Scott BairSBScott Bair
- Riccardo CasaliniRCRiccardo Casalini
- 1 January 2008
- journal article
- research article
- Published by ASME International in Journal of Tribology
- Vol. 130 (4) , 041802
Abstract
Quantitative calculations of film thickness and friction in elastohydrodynamic lubrication will require that the low-shear viscosity, , be described with far greater accuracy than it is today. The free volume model has the advantage, over those currently used, of reproducing all of the trends that were known ago, although not necessarily to experimental accuracy. A scaling parameter, , based on the repulsive intermolecular potential having exponent allows the viscosity to be written as a function of temperature, , and volume, , only, as . The appropriate function for lubricants appears to be a Vogel-like form, . Parameters are presented here for seven liquids. When the dynamic crossover is present, two such functions are required. A low molecular weight dimethyl silicone having high compressibility is an exception.
Keywords
This publication has 35 references indexed in Scilit:
- Fragility and the dynamic crossover in lubricantsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2007
- Effect of high-pressure rheology of lubricants upon entrapped oil film behaviour at halting elastohydrodynamic lubricationProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2007
- Temperature and volume effects on the change of dynamics in propylene carbonatePhysical Review E, 2004
- The temperature, pressure and time dependence of lubricant viscosityTribology International, 2001
- Thermal Effects on the Film Thickness in Elliptic EHL Contacts With Entrainment Along the Major Contact AxisJournal of Tribology, 2001
- Measurements of real non-Newtonian response for liquid lubricants under moderate pressuresProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2001
- Prediction of traction in elastohydrodynamic lubricationProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 1998
- Shear behaviour of elastohydrodynamic oil filmsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1977
- Dense fluid shear viscosity and thermal conductivity—the excessAIChE Journal, 1975
- Dielectric properties of glycerol in the range 0.1–10 5 Hz, 218–357 K, 0–53 kbFaraday Symposia of the Chemical Society, 1972