A Novel Bulk-Flow Model for Improved Predictions of Force Coefficients in Grooved Oil Seals Operating Eccentrically
- 1 March 2012
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 134 (5) , 052509
Abstract
Oil seals in centrifugal compressors reduce leakage of the process gas into the support bearings and ambient. Under certain operating conditions of speed and pressure, oil seals lock, becoming a source of hydrodynamic instability due to excessively large cross coupled stiffness coefficients. It is a common practice to machine circumferential grooves, breaking the seal land, to isolate shear flow induced film pressures in contiguous lands, and hence reducing the seal cross coupled stiffnesses. Published tests results for oil seal rings shows that an inner land groove, shallow or deep, does not actually reduce the cross-stiffnesses as much as conventional models predict. In addition, the tested grooved oil seals evidenced large added mass coefficients while predictive models, based on classical lubrication theory, neglect fluid inertia effects. This paper introduces a bulk-flow model for groove oil seals operating eccentrically and its solution via the finite element (FE) method. The analysis relies on an effective groove depth, different from the physical depth, which delimits the upper boundary for the squeeze film flow. Predictions of rotordynamic force coefficients are compared to published experimental force coefficients for a smooth land seal and a seal with a single inner groove with depth equaling 15 times the land clearance. The test data represent operation at 10 krpm and 70 bar supply pressure, and four journal eccentricity ratios (e/c= 0, 0.3, 0.5, 0.7). Predictions from the current model agree with the test data for operation at the lowest eccentricities (e/c= 0.3) with discrepancies increasing at larger journal eccentricities. The new flow model is a significant improvement towards the accurate estimation of grooved seal cross-coupled stiffnesses and added mass coefficients; the latter was previously ignored or largely under predicted.Keywords
This publication has 10 references indexed in Scilit:
- A Model for Improved Prediction of Force Coefficients in Grooved Squeeze Film Dampers and Oil Seal RingsJournal of Tribology, 2010
- The Finite Element Method in Heat Transfer and Fluid Dynamics2010
- Complete Squeeze-Film Damper Analysis Based on the “Bulk Flow” EquationsTribology Transactions, 2009
- Influence of Groove Size on the Static and Rotordynamic Characteristics of Short, Laminar-Flow Annular SealsJournal of Tribology, 2007
- Rotordynamic-Coefficients and Static (Equilibrium Loci and Leakage) Characteristics for Short, Laminar-flow Annular SealsJournal of Tribology, 2005
- A Bulk-Flow Analysis of Static and Dynamic Characteristics of Eccentric Circumferentially-Grooved Liquid Annular SealsJournal of Tribology, 2004
- Bulk-Flow Model for the Transition to Turbulence Regime in Annular Pressure SealsTribology Transactions, 1996
- Finite Element Thermo-Hydrodynamic Analysis of a Circumferentially Grooved Floating Oil Ring SealTribology Transactions, 1995
- Analysis of Multi-Land High Pressure Oil SealsTribology Transactions, 1993
- Effect of Fluid Inertia on Squeeze-Film Damper Forces for Small-Amplitude Circular-Centered MotionsA S L E Transactions, 1987