Role of Mn Content on the Electrochemical Properties of Nickel-Rich Layered LiNi0.8–xCo0.1Mn0.1+xO2 (0.0 ≤ x ≤ 0.08) Cathodes for Lithium-Ion Batteries
- 19 March 2015
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 7 (12) , 6926-6934
Abstract
Ni-rich layered oxides (Ni content >60%) are promising cathode candidates for Li-ion batteries because of their high discharge capacity, high energy density, and low cost. However, fast capacity fading, poor thermal stability, and sensitivity to the ambient moisture still plague their mass application. In this work, we systematically investigate the effects of Mn content on the structure, morphology, electrochemical performance, and thermal stability of the Ni-rich cathode materials LiNi0.8–xCo0.1Mn0.1+xO2 (0.0 ≤ x ≤ 0.08). It is demonstrated that with the increase in Mn content and decrease in Ni content, the cycling stability of LiNi0.8–xCo0.1Mn0.1+xO2 to a cutoff charge voltage of 4.5 V is significantly improved. The high-Mn-content electrode LiNi0.72Co0.10Mn0.18O2 shows a capacity retention of 85.7% after 100 cycles at a 0.2 C rate at room temperature, much higher than those of the lower Mn-content samples LiNi0.80Co0.10Mn0.10O2 (64.0%) and LiNi0.76Co0.10Mn0.14O2 (72.9%). The improved capacity retention of the high-Mn-content electrode LiNi0.72Co0.10Mn0.18O2 is due to the stabilization of the electrode/electrolyte interface, as evidenced by the lower solid-electrolyte interphase (SEI) resistance and charge-transfer resistance. Furthermore, with the increase in Mn content and decrease in Ni content, the thermal stability of the Ni-rich cathode is also remarkably enhanced.Keywords
Funding Information
- Vehicle Technologies Program (DE-EE0006447)
This publication has 39 references indexed in Scilit:
- K+-Doped Li1.2Mn0.54Co0.13Ni0.13O2: A Novel Cathode Material with an Enhanced Cycling Stability for Lithium-Ion BatteriesACS Applied Materials & Interfaces, 2014
- Flexible High-Energy Li-Ion Batteries with Fast-Charging CapabilityNano Letters, 2014
- Mitigating Voltage Fade in Cathode Materials by Improving the Atomic Level Uniformity of Elemental DistributionNano Letters, 2014
- Mn–Ni Content-Dependent Structures and Electrochemical Behaviors of Serial Li1.2Ni0.13+xCo0.13Mn0.54–xO2 as Lithium-Ion Battery CathodesACS Applied Materials & Interfaces, 2014
- Smart design of lithium-rich layered oxide cathode compositions with suppressed voltage decayJournal of Materials Chemistry A, 2014
- Understanding the Degradation Mechanisms of LiNi0.5Co0.2Mn0.3O2 Cathode Material in Lithium Ion BatteriesAdvanced Energy Materials, 2013
- Corrosion/Fragmentation of Layered Composite Cathode and Related Capacity/Voltage Fading during Cycling ProcessNano Letters, 2013
- A New Type of Protective Surface Layer for High-Capacity Ni-Based Cathode Materials: Nanoscaled Surface Pillaring LayerNano Letters, 2013
- Nanostructured high-energy cathode materials for advanced lithium batteriesNature Materials, 2012
- High-energy cathode material for long-life and safe lithium batteriesNature Materials, 2009