Development and Implementation of Die Forging Technology Eliminating Flange Welding Operations in Conveyor Driver Forging
Open Access
Abstract
This article presents research results regarding the development of a new manufacturing technology for an element assigned to belt conveyor flights in the extractive industry through hot die forging (of a forging with a double-sided flange) instead of the currently realized process of producing such an element by welding two flanges onto a sleeve or one flange onto a flange forging. The studies were conducted to design an innovative and low-waste technology, mainly with the use of numerical modelling and simulations, partially based on the current technology of producing a flange forging. Additionally, during the development of the forging process, the aspect of robotization was considered, both in respect of the forging tools and the process of transportation and relocation of forging between the impressions and the forging aggregates. A thermo-mechanical model of the process of producing a belt conveyor flight forging with deformable tools was elaborated by means of the Forge 3NxT program. The results of the conducted numerical modelling made it possible, among other things, to develop models of forging tools ensuring the proper manner of material flow and filling of the impressions, as well as temperature and plastic deformation distributions in the forging and also the detection of possible forging defects. For the technology elaborated this way, the tools were built together with a special instrument for flanging in the metal, and technological tests were performed under industrial conditions. The produced forgings were verified through a measurement of the geometry, by way of 3D scanning, as well as the hardness, which definitively confirmed the properness of the developed technology. The obtained technological test results made it possible to confirm that the elaborated construction, as well as the tool impressions, ensure the possibility of implementing the designed technology with the use of robotization and automatization of the forging process.Keywords
Funding Information
- NCBR Poland (POIR.01.01.01-00-0047/17-00)
This publication has 43 references indexed in Scilit:
- Application of intelligent decision system based on artificial neural network in free forging of the engine main shaftThe International Journal of Advanced Manufacturing Technology, 2024
- Research on deformation uniformity control of thin-walled conical aeroengine forgings based on GA-SVRThe International Journal of Advanced Manufacturing Technology, 2024
- Multi-objective optimization of concave radial forging process parameters based on response surface methodology and genetic algorithmThe International Journal of Advanced Manufacturing Technology, 2024
- Control of technological parameters in the process of ribbed panel forging: use of measuring equipment and mathematical modeling methodsMeasurement Techniques, 2024
- Analysis and optimization of die geometry for forging dies in railway wheel manufacturingInternational Journal on Interactive Design and Manufacturing (IJIDeM), 2023
- A Systematic Review of Factors Affecting the Process Parameters and Various Measurement Techniques in Forging ProcessesSteel Research International, 2023
- An implementation of robotization for the chosen hot die forging processArchives of Civil and Mechanical Engineering, 2022
- Numerical modeling and anvil design of high-speed forging process for railway axlesInternational Journal of Material Forming, 2020
- Defect analysis and design optimization on the hot forging of automotive balance shaft based on 3D and 2D simulationsThe International Journal of Advanced Manufacturing Technology, 2017
- An optimisation strategy for industrial metal forming processesStructural and Multidisciplinary Optimization, 2008