Electrical Resistivity Imaging of Laboratory Soilcrete Column Geometry
- 1 March 2016
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 142 (3)
Abstract
Ground improvement via jet grouting is commonly used to strengthen weak ground and/or create hydraulic barriers. Delivering soilcrete columns with tightly controlled and known diameters is critical to performance; however, techniques to assess jet grout geometry during construction are lacking. This paper reports the results of a study on electrical resistivity imaging of soilcrete by investigating the effects of electrode configuration and electrical protocol type on laboratory scale soilcrete columns constructed in a tank filled with sand. Experimental results are verified via numerical modeling and the model is used to analyze the changes in soilcrete resistivity that result from geometric variation. The results of this study indicate that resistivity imaging with direct contact electrodes can estimate the diameter of laboratory scale jet grout columns to within ±5% of the as-built column diameter. A relationship between electrode spacing and column diameter is identified and quantified to more...Keywords
This publication has 24 references indexed in Scilit:
- Field Design of Jet Grouting Parameters on Soilcrete ColumnsApplied Mechanics and Materials, 2012
- Review: Some low-frequency electrical methods for subsurface characterization and monitoring in hydrogeologyHydrogeology Journal, 2012
- Three-dimensional Electrical Resistivity Tomography to control the injection of expanding resins for the treatment and stabilization of foundation soilsEngineering Geology, 2011
- The Application of COMSOL Multiphysics in Direct Current Method Forward ModelingProcedia Earth and Planetary Science, 2011
- Indirect estimation of injected mortar volume in historical walls using the electrical resistivity tomographyJournal of Cultural Heritage, 2010
- Quality Assessment and Quality Control of Deep Soil Mixing Construction for Stabilizing Expansive SubsoilsJournal of Geotechnical and Geoenvironmental Engineering, 2010
- Selectivity of seismic electric signal (SES) of the 2000 Izu earthquake swarm: a 3D FEM numerical simulation modelProceedings of the Japan Academy, Series B, 2010
- 4-D inversion of DC resistivity monitoring data acquired over a dynamically changing earth modelJournal of Applied Geophysics, 2009
- A closed-form solution for the computation of geometric correction factors for four-point resistivity measurements on cylindrical specimensMeasurement Science and Technology, 2008
- Electrically conductive cement-based materialsAdvances in Cement Research, 2004