Applicability criteria for equivalent continuum modeling of multiscale fracture networks in porous media
Authors:
- 1 November 2025
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
Abstract
The equivalent continuum model is a widely used approach for simplifying simulations of small-scale fracture seepage. However, its applicability has long been constrained by ambiguous scale boundaries and heterogeneous fracture distributions. In this study, numerical models with varying scale ratios (model size to fracture size) and degrees of distribution homogeneity are systematically developed to clarify how these factors constrain the accuracy of the equivalent continuum model. The results show that the pressure difference decreases significantly with the scale ratio, from the order of 10−1 MPa to 10−3 MPa as the scale ratio increases to 103. Fracture distribution homogeneity controls the spatial extent of the pressure difference. At a homogeneity level of 1, the region with a significant pressure difference (ΔP > 0.1 MPa) accounts for only 3.42% of the total area. Based on these findings, this study establishes an applicability chart for the equivalent continuum model that clearly delineates the criteria by incorporating both scale ratio and homogeneity. The chart clearly identifies an “equivalent region” (scale ratio ≥103 and homogeneity ≥0.8) and a “transition region” (scale ratio ≥102 and homogeneity ≥0.4208), together with quantified error expectations. This applicability chart provides explicit quantitative criteria and a solid theoretical basis for the accurate use of the equivalent continuum model.Keywords
Funding Information
- National Natural Science Foundation of China (U24B2038)
This publication has 7 references indexed in Scilit:
- Equivalent fracture network model for steady seepage problems with free surfacesJournal of Hydrology, 2021
- Numerical Study on Application Conditions of Equivalent Continuum Method for Modeling Heat Transfer in Fractured Geothermal ReservoirsProcesses, 2021
- Estimation of REV for fractured rock masses based on Geological Strength IndexInternational Journal of Rock Mechanics and Mining Sciences, 2020
- A fully coupled fracture equivalent continuum-dual porosity model for hydro-mechanical process in fractured shale gas reservoirsComputers and Geotechnics, 2019
- Determination of the geometrical REV based on fracture connectivity: a case study of an underground excavation at the Songta dam site, ChinaBulletin of Engineering Geology and the Environment, 2017
- Numerical investigation of the effect of fracture intensity on deformability and REV of fractured rock massesInternational Journal of Rock Mechanics and Mining Sciences, 2013
- Characterizing flow and transport in fractured geological media: A reviewAdvances in Water Resources, 2002